Order Products : sales@su-jiao.com
DOW™ LLDPE NG 1045B
| Category: | LLDPE , Linear Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2z3rBD_DOW-LLDPE-NG-1045B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LLDPE NG 1045B is a Linear Low Density Polyethylene resin, 1-Butene copolymer, produced in the Solution process. This resin is designed to be used in blown extrusion to produce films for industrial and consumer applications, such as liners and bags. Complies with:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 51 | µm | |
| Secant Modulus | ASTM D882 | ||
| 2% Secant, MD : 51 µm | 255 | MPa | |
| 2% Secant, TD : 51 µm | 317 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 51 µm | 8.30 | MPa | |
| TD : Yield, 51 µm | 8.90 | MPa | |
| MD : Break, 51 µm | 30.6 | MPa | |
| TD : Break, 51 µm | 27.9 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 51 µm | 700 | % | |
| TD : Break, 51 µm | 810 | % | |
| Dart Drop Impact | 180 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 51 µm | 320 | g | |
| TD : 51 µm | 690 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 48 | ASTM D2457 | |
| Haze | 18 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® PA6 900/11 GF10 MR20 SV12-778MCF | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
| Hanwha Total PP BB110 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Impact Copolymer | Hanwha Total PP |
| TECHNYL® B 218 MT25 V15 BLACK 21 N | Solvay Engineering Plastics | Nylon 66/6 | TECHNYL® |
| Sumiliteresin® ECP-158 | SBHPP | Epoxy | Sumiliteresin® |
| PENTAMID B E20 H black | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
