Order Products : sales@su-jiao.com
TPSiV™ 4200-70A
| Category: | TPSiV , Thermoplastic Silicone Vulcanizate |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | TPSiV™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2yUe2X_TPSiV-4200-70A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPSiV® 4200-70A Thermoplastic Elastomer is a thermoplastic elastomer with good chemical resistance, durability, and excellent bonding to Polycarbonate, ABS, and similar polar substrates. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/10.0 kg) | 27 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 to 3.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 74 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 26.0 | MPa | ISO 178 |
| Flexural Stress | 2.07 | MPa | ISO 178 |
| Taber Abrasion Resistance (1000 Cycles) | 62.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 3.70 | MPa | ISO 37 |
| Tensile Stress (Yield) | 12.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 520 | % | ISO 37 |
| Tear Strength | 45 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 22 hr | 19 | % | |
| 70°C, 22 hr | 68 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 to 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 165 to 175 | °C | |
| Middle Temperature | 170 to 180 | °C | |
| Front Temperature | 180 to 195 | °C | |
| Nozzle Temperature | 185 to 200 | °C | |
| Processing (Melt) Temp | 195 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 281 TFE 5 HS | RTP Company | Nylon 66 | RTP |
| ULTEM™ 2100F resin | SABIC Innovative Plastics Europe | PEI | ULTEM™ |
| Nypol® PA B3 HL UV PRTA011 NT340 | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| DURANEX® SF755 | Polyplastics Co., Ltd. | PBT+PET | DURANEX® |
| Osterlene® LLH1018 | Osterman & Company | LLDPE | Osterlene® |
