Order Products : sales@su-jiao.com

ALKAMIX™ SAMBA

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	ALKAMIX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2yKlZ0_ALKAMIX-SAMBA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SAMBA is a slip masterbatch formulated with Erucamide at a concentration of 2 percent. SAMBA can be added to polyethylene during extrusion to reduce the coefficient of friction of films. The level required will vary according to coefficient of friction desired; gauge of film, polymer type (LLDPE, LDPE, etc..) and other factors such as the presence of other additives (including antiblocks, colourants / pigments, etc...). For injection moulded articles, typical addition rates of SAMBA would be 2.0% due to the thickness of the moulded article. Higher addition rates of SAMBA may result in problems with printing or label adhesion, or possibly warpage. The maximum level of addition of SAMBA based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 10 percent, when added to a polyethylene formulation free of any slip additives.

Message

SAMBA is a slip masterbatch formulated with Erucamide at a concentration of 2 percent.

SAMBA can be added to polyethylene during extrusion to reduce the coefficient of friction of films. The level required will vary according to coefficient of friction desired; gauge of film, polymer type (LLDPE, LDPE, etc..) and other factors such as the presence of other additives (including antiblocks, colourants / pigments, etc...). For injection moulded articles, typical addition rates of SAMBA would be 2.0% due to the thickness of the moulded article. Higher addition rates of SAMBA may result in problems with printing or label adhesion, or possibly warpage.

The maximum level of addition of SAMBA based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 10 percent, when added to a polyethylene formulation free of any slip additives.

General Information
Additive	Slip (2%)
Features	Slip
Uses	Blending
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.922	g/cm³	ASTM D1505

Resin Grade	Manufacturer	Category	Trademark
RTP 4003 TFE 15	RTP Company	PPA	RTP
Mirakutoran® TPU E595PUOO	Japan Mirakutoran Inc.	TPU Alloy	Mirakutoran® TPU
Nanjing Hongrui PBT T304	Nanjing Hongrui Engineering Plastics Co., Ltd.	PBT	Nanjing Hongrui PBT
Escorene™ Ultra UL 00728	ExxonMobil Chemical	EVA	Escorene™ Ultra
Hanwha Total PP GH73	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, High Crystal	Hanwha Total PP