Order Products : sales@su-jiao.com

Marlex® 5104

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2xsQh0_Marlex-5104.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Marlex® 5104 is a Low Density Polyethylene material. It is available in Latin America or North America for blow molding or extrusion.

Important attributes of Marlex® 5104 are:

Clarity

Good Flexibility

Homopolymer

Impact Resistant

Sterilizable

Typical applications include:

Additive/Masterbatch

Adhesives/Tapes

Bottles

Consumer Goods

Food Contact Applications

General Information
Features	Autoclavable Good Flexibility Good Impact Resistance Homopolymer Medium Clarity Medium Gloss
Uses	Adhesives Blending Bottles Pharmaceuticals Simulated Wood Parts Toys
Agency Ratings	ASTM D 4976-PE113 FDA 21 CFR 177.1520(c) 2.2
Forms	Pellets
Processing Method	Blow Molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.924	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.3	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	16.0	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	600	%	ASTM D638
Flexural Modulus - Tangent ³(Compression Molded)	340	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746A

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min
3 .	13 mm/min

Resin Grade	Manufacturer	Category	Trademark
RTP 202 TFE 13 SI 2	RTP Company	Nylon 66	RTP
TRIREX® 3022L1(I)	Samyang Corporation	PC	TRIREX®
Niche PA6GF33N	Niche Polymer, LLC	Nylon 6	Niche
CONTINUUM™ DGDB-2490 NT	The Dow Chemical Company	HDPE	CONTINUUM™
Elvakon® 4490	Lucite International Inc.	Acrylic (PMMA)	Elvakon®