Order Products : sales@su-jiao.com
ICORENE® 3575
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2xKMNM_ICORENE-3575.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 3575 is a hexene medium density polyethylene with outstanding processability, specifically developed for rotational moulding. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness. ICORENE® 3575 is fully UV stabilized. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 450 | % | ASTM D638 |
| Flexural Modulus | 650 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 170 | J/cm | Internal Method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Borealis PE MG9647B | Borealis AG | HDPE | Borealis PE |
| GAPEX® APP30GP08HB NATURAL | Ferro Corporation | PP Homopolymer | GAPEX® |
| EPO-TEK® 302 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Lupolen 4261A IMBD | LyondellBasell Industries | HDPE, HMW | Lupolen |
| LNP™ STAT-KON™ DEF13 compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
