Order Products : sales@su-jiao.com
Epolene® C-16P
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2wWIZB_Epolene-C-16P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Epolene C-16P is a branched low density polyethylene powder modified with maleic anhydride. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and applications requiring compatibility with polyamide. Coatings produced with Epolene C-16P exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat-seal ability. In hot melt adhesives, the maleic anhydride modification allows for improved adhesion, greater filler tolerance, broader capabilities, and improved aging properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Acid Number | 2.00 | mg KOH/g | |
| Molecular Weight 1 | 26000 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ring and Ball Softening Point | 102 | °C | ASTM E28 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | 300 | mm | ASTM D5 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity | |||
| 190°C | 2850 | mPa·s | |
| 125°C | 16700 | mPa·s |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID A 280 G3 K3 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| BCC Resins BC 100 Medium | BCC Products Inc. | EA | BCC Resins |
| BESTPOLUX PCA-02 | Triesa Plastics | PC+ABS | BESTPOLUX |
| FLEXITEQ™ F55A910 | Marplex Australia Pty. Ltd. | TPV | FLEXITEQ™ |
| Magnobond 6021-1 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
