Order Products : sales@su-jiao.com

Safron® C770-70RNA

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Safripol (PTY) LTD
Trademark:	Safron®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2tVqPD_Safron-C770-70RNA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Safron® C770-70RNA Polypropylene Resin is a high performance impact copolymer developed especially for high speed thin wall injection moulding. It is a very high melt flow rate impact copolymer featuring good impact strength. Safron® C770-70RNA Polypropylene Resin is designed and formulated to allow for easy processing, short cycle times, and good part dimensional stability.

Safron® C770-70RNA Polypropylene Resin contains an effective anti-static package.

General Information
Additive	Antistatic property
Features	Good dimensional stability Impact copolymer Antistatic property Impact resistance, good Workability, good Fast molding cycle High liquidity Compliance of Food Exposure
Uses	Thin wall packaging Thin wall container Lawn and Garden Equipment Cover Shield Household goods Food packaging Shell
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1a Europe 10/1/2011 12:00:00 AM
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	70	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Injection Molded)	60		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)	21.0	MPa	ISO 527-2
Tensile Strain (Yield, Injection Molded)	5.0	%	ISO 527-2
Flexural Modulus (Injection Molded)	1050	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-20°C, injection molding	4.2	kJ/m²	ISO 179/1eA
0°C, injection molding	5.0	kJ/m²	ISO 179/1eA
23°C, injection molding	7.5	kJ/m²	ISO 179/1eA

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature ¹(0.45 MPa, Unannealed)	70.0	°C	ISO 75-2/B
Vicat Softening Temperature ²	146	°C	ISO 306/A

Injection	Nominal Value	Unit
Rear Temperature	190	°C
Middle Temperature	220 - 240	°C
Front Temperature	240 - 260	°C
Nozzle Temperature	240	°C

Injection instructions
Zone 4 Temperature: 260°C

Note Message
1 .	Injection Molded
2 .	Injection Molded

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SRF3834	Teknor Apex Asia Pacific PTE. LTD.	PVC, Rigid	Sinvicomp
EMAC® SP2220	Westlake Chemical Corporation	EMA	EMAC®
K-Prene 7000 XL 55	Technovinyl Polymers India Ltd.	TPV	K-Prene
INELEC PSUCF15	Infinity LTL Engineered Compounds	PSU	INELEC
Sylvin 5412-85 Natural	Sylvin Technologies Incorporated	TPE	Sylvin