Order Products : sales@su-jiao.com

MAJORIS GE460 GREY 8432

Category:	PP, Unspecified , Polypropylene
Manufacturer:	AD majoris
Trademark:	MAJORIS
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2olLqp_MAJORIS-GE460-GREY-8432.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

MAJORIS GE460 GREY 8432 is a special long glass fibre reinforced polypropylene grade, for injection moulding and extrusion. The long glass fibres, chemically coupled to the polypropylene matrix, are providing with outstanding mechanical properties.

APPLICATIONS
MAJORIS GE460 GREY 8432 is intended for injection moulding of highly demanding technical applications.
The excellent properties of MAJORIS GE460 GREY 8432 make it suitable for:

Electrical components, automotive parts, interior, exterior and under the bonnet, structural furniture parts, load bearing, demanding components for various engineering sectors.

MAJORIS GE460 GREY 8432 can, in many of these applications, substitute other engineering plastics or metal alloys.

General Information
Filler / Reinforcement	Long glass fiber, 40% filler by weight
Additive	heat stabilizer
Features	Chemical coupling Recyclable materials Heat resistance, high Thermal Stability
Uses	Electrical components Furniture Metal substitution Parts under the hood of a car Car interior parts Automotive exterior parts
Appearance	Grey
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.24	g/cm³	ISO 1183
Molding Shrinkage	0.40	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	9310	MPa	ISO 527-2/1
Tensile Stress (Break)	104	MPa	ISO 527-2/50
Tensile Strain (Break)	2.7	%	ISO 527-2/50
Flexural Modulus ¹	7510	MPa	ISO 178
Flexural Stress ²	151	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	20	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	53	kJ/m²	ISO 179/1eU

Injection	Nominal Value	Unit
Rear Temperature	230 - 250	°C
Processing (Melt) Temp	250 - 280	°C
Mold Temperature	80.0 - 100	°C
Injection Pressure	30.0 - 60.0	MPa
Injection Rate	Slow
Screw Speed	30 - 150	rpm

Injection instructions
Holding pressure: 50 to 70% of the injection pressureBack pressure: as low as possible, 0 to 10%Holding time: as long as practical

Note Message
1 .	2.0 mm/min
2 .	2.0 mm/min

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene FRP257-01	RheTech, Inc.	PP Copolymer	RheTech Polypropylene
SUPRAN® PP1350	SAMBARK	PP, Unspecified	SUPRAN®
Anjacom® 250-H/GF30	Almaak International GmbH	Nylon 6	Anjacom®
Flontech® FT-GL15-M5-6	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
POCAN® B 1300 000000	LANXESS Corporation	PBT	POCAN®