Order Products : sales@su-jiao.com
KW Plastics KW 621-T30
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2m2FIk_KW-Plastics-KW-621-T30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Copolymer Impact Polypropylene with 30% Talc Post-Consumer Resin Injection Molding CHARACTERISTICS 30% talc reinforced for improved stiffness, heat distortion, shrink rate and cycle time. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.90 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.4 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 2280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648B | ||
| 0.45 MPa, Unannealed | 116 | °C | |
| 1.8 MPa, Unannealed | 60.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermylene® P6-30FM-Y249B | Asahi Kasei Plastics North America Inc. | PP, Unspecified | Thermylene® |
| Globalprene® 9552U | Lee Chang Yung Chemical Industry Corp. | SEBS | Globalprene® |
| Grivory® GVL-5H nat | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| LNP™ LUBRICOMP™ DCL32 compound | SABIC Innovative Plastics Europe | PC | LNP™ LUBRICOMP™ |
| Braskem PE HDP0353 | Braskem IDESA | HDPE | Braskem PE |
