Order Products : sales@su-jiao.com
Braskem PP H 606
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2lvZN3_Braskem-PP-H-606.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: H 606 is low melt flow rate homopolymer with general purpose additive package. This resin is designed for extrusion and thermoforming. H 606 presents excellent processability and high output, excellent stiffness/impact strength balance, high melt strength and low odor/taste transfer. Applications: Thermoformed packaging for food, cosmetic, health care and cleaning products; Flat and corrugated sheets |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.1 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 99 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 32.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 15 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1300 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 38 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 92.0 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 52.0 | °C | |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 MF4 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| ALTECH® PA66 A 3040/100 GB40 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| GLS ABS SN06 | GLS Polymers Pvt. Ltd. | ABS | GLS ABS |
| Hostacom CB 726 F | LyondellBasell Industries | PP Impact Copolymer | Hostacom |
| SCHULAMID® PPA GF 33 | A. Schulman Europe | PPA | SCHULAMID® |
