Order Products : sales@su-jiao.com
REPOL® H034SG
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | REPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2kGfR7_REPOL-H034SG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Repol H034SG is recommended for use in Oriented Film process. Repol H034SG is suitable for low thickness films and processing on high line speeds. Repol H034SG is the material of choice for BOPP films used in adhesive tapes, food packaging, cigarette & textile overwraps, synthetic paper, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.4 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 36.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 12 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1350 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 40 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 104 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | Type I, 50 mm/min |
| 2 . | Type I, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Footwear GF-6107 | S&E Specialty Polymers, LLC | PVC+NBR | S&E Footwear |
| MOSTEN GB 107 | UNIPETROL RPA | PP Homopolymer | MOSTEN |
| WMB 126M | Pooya Polymer Tehran | Polyolefin, Unspecified | WMB |
| Mylar® EC (400 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| alphalon™ 25 | Grupa Azoty ATT Polymers GmbH | Nylon 6 | alphalon™ |
