Order Products : sales@su-jiao.com

Braskem PP C113-01

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Braskem Europe GmbH
Trademark:	Braskem PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2gazZ1_Braskem-PP-C113-01.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Braskem C113-01 Polypropylene Impact Copolymer is a high performance impact copolymer developed for sheet extrusion and blow moulding applications. Main Characteristics: A good balance of stiffness and impact properties Good processability High melt strength Complies with: European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details. Applications: Extruded sheet and boards Extrusion profiles and pipes Drainage and sewage pipes Blow moulded containers Paper lamination

Message

Braskem C113-01 Polypropylene Impact Copolymer is a high performance impact copolymer developed for sheet extrusion and blow moulding applications.

Main Characteristics:

A good balance of stiffness and impact properties

Good processability

High melt strength

Complies with:

European Commission Regulation (EU) No 10/2011

Consult the regulations for complete details.

Applications:

Extruded sheet and boards

Extrusion profiles and pipes

Drainage and sewage pipes

Blow moulded containers

Paper lamination

General Information
Agency Ratings	EU No 10/2011
Forms	Pellets
Processing Method	Blow Molding Sheet Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.90	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)	24.0	MPa	ISO 527-2
Tensile Strain (Yield, Injection Molded)	15	%	ISO 527-2
Flexural Modulus (Injection Molded)	1100	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/eA
0°C, Injection Molded	12	kJ/m²
23°C, Injection Molded	60	kJ/m²

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	85.0	°C	ISO 75-2/B
Vicat Softening Temperature	146	°C	ISO 306/A

Resin Grade	Manufacturer	Category	Trademark
StyroCal™ HP	Heritage Plastics, Inc.	PS (HIPS)	StyroCal™
Sylvin 9912-60 BLACK	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
WELLAMID Nylon 6600 MZ 401 CP	CP-Polymer-Technik GmbH & Co. KG	Nylon 66	WELLAMID Nylon
Eltex® B4922/20N3000	INEOS Olefins & Polymers Europe	HDPE	Eltex®
TechnoElast V A9000 I 2 sw	TechnoCompound GmbH	TPE	TechnoElast