Order Products : sales@su-jiao.com
APEX® 4109
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Company |
| Trademark: | APEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2gKqyu_APEX-4109.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
APEX®4109 is a flexible polyvinyl chloride material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. APEX®The main features of the 4109 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Wire Types |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 - 1.2 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 13.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 290 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 60.0 | °C | ASTM D794 |
| Brittleness Temperature | -24.0 | °C | ASTM D746 |
| RTI Elec | 90.0 | °C | UL 746 |
| RTI | 90.0 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (CTI) (3.00 mm) | PLC 0 | UL 746 | |
| High Amp Arc Ignition (HAI) (3.00 mm) | PLC 1 | UL 746 | |
| Hot-wire Ignition (HWI) (3.00 mm) | PLC 1 | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.810 mm | V-0 | UL 94 | |
| 3.00 mm | V-0 | UL 94 | |
| Oxygen Index | 25 | % | ASTM D2863 |
| Additional Information |
|---|
| 插头温度额定值：60°C认证部件，CSA C22.2 No. 0.6，CSA 可燃性等级：0.6V-0 @ 0.84 毫米 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 182 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 805 TFE 15 SI 2 | RTP Company | Acetal (POM) Copolymer | RTP |
| Yuyao PP TL203 (GF) | Yuyao Tenglong Plastics Co., Ltd. | PP, Unspecified | Yuyao PP |
| NEFTEKHIM PE 6152C (526H3) | Nizhnekamskneftekhim Inc. | HDPE | NEFTEKHIM PE |
| Kaneka MUH LG5033 | Kaneka Corporation | ABS | Kaneka MUH |
| Sylvin 9067-90 White 1353 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
