Order Products : sales@su-jiao.com
Desmoderm® VPLS 2262
| Category: | PUR-Ether , Polyurethane (Polyether based) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmoderm® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2c2Wio_Desmoderm-VPLS-2262.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Desmoderm VP LS 2262 is a one-component polyether urethane based on an aromatic diisocyanate. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity 1 | DIN EN ISO 3219/A.3 | ||
| Tempered 5 hr, 120°C : 23°C | 4.00 to 60.0 | Pa·s | |
| Untempered : 23°C | 4.00 to 20.0 | Pa·s |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Light-Fastness | 4.00 to 5.00 | DIN EN ISO 105-B02 | |
| Softening Range | 185 to 195 | °C |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 100 | µm | |
| Tensile Modulus - 100% (100 µm) | 18.0 to 19.0 | MPa | DIN 53504 |
| Tensile Strength | DIN 53504 | ||
| 100 µm | 55.0 to 65.0 | MPa | |
| 70°C, 100 µm 2 | 55.0 to 65.0 | MPa | |
| Tensile Elongation (Break, 100 µm) | 400 to 500 | % | DIN 53504 |
| Note Message | |
|---|---|
| 1 . | 20% solution in dimethylformamide |
| 2 . | after 14 days hydrolysis, 95% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SOLLAMID B 2700 FV 25 | Krisoll Resinas Plásticas Ltda. | Nylon 6 | SOLLAMID |
| 3M™ Dyneon™ PTFE Compound TF 6220 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
| Boda FF3070 | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| Globalene® BA45H | Lee Chang Yung Chemical Industry Corp. | PP Alloy | Globalene® |
| LNP™ THERMOCOMP™ DX07408 compound | SABIC Innovative Plastics | PC | LNP™ THERMOCOMP™ |
