Order Products : sales@su-jiao.com
Sofprene T® 550100A40
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Sofprene T® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2bpLLY_Sofprene-T-550100A40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sofprene T® 550100A40 is a Styrene Butadiene Styrene Block Copolymer (SBS) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Sofprene T® 550100A40: REACH Compliant. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 0.700 | MPa | ASTM D412 |
| Tensile Strength 2 | 1.30 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 520 | % | ASTM D412 |
| Tear Strength 4 | 9.00 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 | °C | |
| Middle Temperature | 160 | °C | |
| Front Temperature | 170 | °C | |
| Nozzle Temperature | 175 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANBLEND FS8 | Polykemi AB | ASA+PC | SCANBLEND |
| Veroplas 055 | PlastxWorld Inc. | SAN | Veroplas |
| Celanex® 2401 MT | Celanese Corporation | PBT | Celanex® |
| Elastron® G G100.A90.N | Elastron USA, Inc. | SEBS | Elastron® G |
| PENTAMID A GV20 GK10 E H natural | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
