Order Products : sales@su-jiao.com
INEOS Wire & Cable BPD4035
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | INEOS Wire & Cable |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2a8yMh_INEOS-Wire-Cable-BPD4035.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BPD 4035 is a black medium density polyethylene compound designed for cable jacketing. It contains 2.3% of a well dispersed carbon black and an antioxidant package leading to a complete outdoor weatherability and excellent ageing properties. BPD 4035 is based on a polymer which offers an excellent resistance to environmental stress cracking, good low temperature properties, and an excellent extrudability. The polymer density has been chosen near the upper limit of MDPE in order to retain maximum mechanical properties, and resistance to heat deformation. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ISO 1183/D |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.20 | g/10 min | ISO 1133 |
| 190°C/5.0 kg | 0.85 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (10% Igepal, F0) | > 1000 | hr | IEC 60811-4-1 |
| Carbon Black Content | 2.3 | % | IEC 60911-4-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Retention of Mechanical Properties - 10 days (100°C) | > 75 | % | IEC 60811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deformation - 6 hr (115°C) | % | IEC 60811-3-1 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | IEC 60811-1-1 | ||
| Yield | 18.0 | MPa | IEC 60811-1-1 |
| Fracture | 34.0 | MPa | IEC 60811-1-1 |
| Tensile Strain (Break) | > 600 | % | IEC 60811-1-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -76.0 | °C | ISO 974 |
| Vicat Softening Temperature | 116 | °C | ISO 306/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 2.60 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 | °C | |
| Cylinder Zone 2 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 200 | °C | |
| Cylinder Zone 4 Temp. | 200 | °C | |
| Melt Temperature | 210 - 230 | °C | |
| Die Temperature | 210 | °C |
| Extrusion instructions |
|---|
| Head Temperature: 210°CL/D Ratio: 20:1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE F04660 (Blown film) | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| SEQUEL® 1718-PUV | LyondellBasell Industries | TPO (POE) | SEQUEL® |
| Tarnoform® 300 TF4 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| ELASTOSIL® M 4512 | Wacker Chemie AG | Silicone | ELASTOSIL® M |
| Eltex® MED PH23T630 | INEOS Olefins & Polymers Europe | LDPE | Eltex® MED |
