Order Products : sales@su-jiao.com
INEOS Wire & Cable BPD2000
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | INEOS Wire & Cable |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2Z54ao_INEOS-Wire-Cable-BPD2000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BPD2000 is an unstabilised and clean low density polyethylene. Applications BPD2000 is designed for use in Medium voltage (MV) power cables insulation using the Direct Peroxide Injection (DPI) process. For insulation of cables of higher voltage, it is recommended to use our grade BPD2000E, please refer to corresponding datasheet. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.923 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 23°C) | 18.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | > 500 | % | ISO 527-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | > 22 | kV/mm | ASTM D149 |
| Dielectric Constant (50 Hz) | 2.30 | ASTM D150 | |
| Dissipation Factor (50 Hz) | 3.0E-4 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 135 to 145 | °C |
| Note Message | |
|---|---|
| 1 . | Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® HT NT40 GR30 NL XA60 | Eurotec Engineering Plastics | PPA | Tecomid® HT |
| Spartech Polycom PE4120 | Spartech Polycom | HDPE, HMW | Spartech |
| WPP TPO TPO-2561 P Black | Washington Penn Plastic Co. Inc. | TPO | WPP TPO |
| Badamid® B70 M30 | Bada AG | Nylon 6 | Badamid® |
| Geon™ Vinyl Flexible C70U0 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
