Order Products : sales@su-jiao.com
Moplen EP649N
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2Uv5W5_MoplenEP649N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen EP649N is a medium flow heterophasic copolymer development grade with outstanding mechanical properties and antistatics. The product features an easy processability and an excellent stiffness combined with good impact properties and high gloss. This grade is suitable for a wide range of appliances parts, Toys and consumer goods industries. Moplen EP649N resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183, ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield | 31.4 | MPa | ASTM D638 |
| Yield, 23°C | 32.0 | MPa | ISO 527-2/50 |
| Tensile Elongation | |||
| Yield | 7.0 | % | ASTM D638 |
| Yield, 23°C | 6.0 | % | ISO 527-2/50 |
| Flexural Modulus | |||
| -- | 1810 | MPa | ASTM D790 |
| -- | 1750 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 3.0 | kJ/m² | ISO 179/1eA |
| 0°C | 4.0 | kJ/m² | ISO 179/1eA |
| 23°C | 6.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -20°C | 64 | kJ/m² | ISO 179/1eU |
| 0°C | 95 | kJ/m² | ISO 179/1eU |
| 23°C | 140 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 39 | J/m | ASTM D256 |
| 23°C | 98 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 130 | °C | ASTM D648 |
| 0.45 MPa, not annealed | 102 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 153 | °C | ISO 306/A50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL EF-6155 | Teknor Apex Company | TPE | Telcar® |
| Viprene™ G65A-32U-NAT | Alliance Polymers & Services | TPV | Viprene™ |
| Haysite BMC 30000 | Haysite Reinforced Plastics | Polyester, TS | Haysite BMC |
| Infino UF-1017V | LOTTE ADVANCED MATERIALS CO., LTD. | PC | Infino |
| Sarlink® TPE ML-1190N NAT (PRELIMINARY DATA) | Teknor Apex Company | TPE | Sarlink® TPE |
