Monprene® SP-14966 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene SP-14966 is a high performance thermoplastic elastomer that is designed for a variety of consumer applications including water sporting goods. Monprene SP-14966 is a translucent, medium hardness, low density, UV resistant, high flow grade that is designed for injection molding.

General Information
Features	Low Specific Gravity Low density Moisture resistance Good UV resistance Good formability Good flexibility Good coloring Good adhesion High liquidity Good chemical resistance Good wear resistance Good weather resistance Good toughness Elastic Medium hardness
Uses	Water Sports Equipment Handle Plug Washer Washer Soft touch application Soft handle Sporting goods Stationery Rubber substitution Consumer goods application field Swimming Pool Supplies
RoHS Compliance	RoHS compliance
Appearance	Translucent Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.888	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	27	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A	70	ASTM D2240
Shaw A, 5 seconds	68	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
100% strain	3.62	MPa	ASTM D412
Flow : 300% strain	5.34	MPa	ASTM D412
Tensile Strength - Flow (Break)	11.9	MPa	ASTM D412
Tensile Elongation - Flow (Break)	700	%	ASTM D412

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	182 - 232	°C
Middle Temperature	188 - 238	°C
Front Temperature	193 - 243	°C
Nozzle Temperature	199 - 249	°C
Processing (Melt) Temp	199 - 249	°C
Mold Temperature	35 - 49	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	182 - 232	°C
Cylinder Zone 2 Temp.	188 - 238	°C
Cylinder Zone 3 Temp.	193 - 243	°C
Cylinder Zone 4 Temp.	193 - 243	°C
Cylinder Zone 5 Temp.	199 - 249	°C
Die Temperature	199 - 249	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2TuSP3_MonpreneSP14966.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
TECHNO ABS 15 K6	Techno Polymer Co, Ltd.	ABS	TECHNO ABS
SLOVALEN® PH 76 T 20 FRD 5 000/1M	Plastcom	PP, Unspecified	SLOVALEN®
Altuglas® DRT	Altuglas International of Arkema Inc.	Acrylic (PMMA)	Altuglas®
Ecotan B FL HI 2 NAT	Soredi S.p.a.	Nylon 6	Ecotan B
Lionpol HC-204539	Lion Polymers Incorporated	TPE	Lionpol