Order Products : sales@su-jiao.com

Sumiliteresin® PR-50699 I

Category:	Phenolic , Phenolic
Manufacturer:	SBHPP
Trademark:	Sumiliteresin®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2NTdqI_SumiliteresinPR50699I.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SUMILITERSIN® PR-50699 I is a straight novolac phenolic resin type powder form phenolic resin with excellent grinding properties and processability. It is generally applied for bonding material of resinoid grinding wheels such as cutting, off set, etc. Characteristics SUMILITERESIN® PR-50699 I is a powder form phenolic resin with good grinding properties and good processability in production of grinding wheels. It is designed for cold molding and semi-hot molding process. SUMILITERESIN® PR-50699 I is a Short flow type and it has hexamine content about 11%. By using this resin, grinding wheel which is bonded has good cutting feeling, and heat resistance also high wear resistance.

Message

SUMILITERSIN® PR-50699 I is a straight novolac phenolic resin type powder form phenolic resin with excellent grinding properties and processability. It is generally applied for bonding material of resinoid grinding wheels such as cutting, off set, etc.

Characteristics

SUMILITERESIN® PR-50699 I is a powder form phenolic resin with good grinding properties and good processability in production of grinding wheels. It is designed for cold molding and semi-hot molding process.

SUMILITERESIN® PR-50699 I is a Short flow type and it has hexamine content about 11%. By using this resin, grinding wheel which is bonded has good cutting feeling, and heat resistance also high wear resistance.

General Information
Features	Workability, good Good wear resistance Heat resistance, medium
Uses	Bonding
Appearance	White Yellow
Forms	Powder

Physical	Nominal Value	Unit
Flow Length (125°C)	1.30 - 2.00	cm
Sieve Analysis - 106µm		%

Thermal	Nominal Value	Unit
Melting Temperature	93.0 - 101	°C

Uncured Properties	Nominal Value	Unit
Gel Time (150°C)	1.3 - 2.0	min

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene RCT120-01	RheTech, Inc.	PP, Unspecified	RheTech Polypropylene
THERMOLAST® K TF1SNT (Series: FC/S)	KRAIBURG TPE	TPE	THERMOLAST® K
Ultraform® N 2720 M210	BASF Corporation	Acetal (POM) Copolymer	Ultraform®
Ebalta MG 804, 804 GF / MG 804-1	Ebalta Kunststoff GmbH	PUR, Unspecified	Ebalta
LNP™ LUBRILOY™ RX05497 compound	SABIC Innovative Plastics	Nylon 66	LNP™ LUBRILOY™