Order Products : sales@su-jiao.com
Sarlink® TPV 2664
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Sarlink® TPV |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2M07rA_Sarlink-TPV-2664.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sarlink®TPV 2664 is a thermoplastic vulcanized rubber (TPV) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is extrusion or injection molding. Sarlink®The main characteristics of TPV 2664 are: flame retardant/rated flame. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 68 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.90 | MPa | ASTM D412 |
| Tensile Strength 1(fracture, -5°C) | 4.90 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 300 | % | ASTM D412 |
| Tear Strength | 19.3 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 21 | % | ASTM D395 |
| 70°C, 22 hr | 35 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 2 | > -60.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (19.1 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 173 - 213 | °C | |
| Middle Temperature | 179 - 219 | °C | |
| Front Temperature | 184 - 224 | °C | |
| Nozzle Temperature | 190 - 230 | °C | |
| Processing (Melt) Temp | 190 - 230 | °C | |
| Mold Temperature | 35.0 - 60.0 | °C | |
| Injection Pressure | 1.38 - 6.89 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.172 - 0.862 | MPa | |
| Screw Speed | 50 - 120 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 166 - 204 | °C | |
| Cylinder Zone 2 Temp. | 171 - 210 | °C | |
| Cylinder Zone 3 Temp. | 177 - 216 | °C | |
| Cylinder Zone 5 Temp. | 182 - 221 | °C | |
| Die Temperature | 190 - 227 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 30 to 100 rpm |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | No Break @ -76°F. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VICTREX® PEEK 90G | Victrex plc | PEEK | VICTREX® PEEK |
| ALTECH® PA6 A 2030/109 GF30 BK1132-07LS | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| InnoPlus HD5000S | PTT Global Chemical Public Company Limited | HDPE | InnoPlus |
| Osterlene® LLDO-.9-918 | Osterman & Company | LLDPE | Osterlene® |
| Hostacom CR 1171 G1 G14008 | LyondellBasell Industries | PP Copolymer | Hostacom |
