Order Products : sales@su-jiao.com
RELENE® HD55EF010
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2KEOFZ_RELENE-HD55EF010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD55EF010 is a High Density Polyethylene (HDPE) grade, specially formulated to manufacture oriented monofilament products. It has narrow molecular wight distribution and has very good processability, less motor load and high output combined with very good elongation and filmanet properties to make it a grade of choice. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 23.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 15 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 820 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecodur® PB70 GB30 NL | Eurotec Engineering Plastics | PBT | Tecodur® |
| Axiall PVC 7768 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| Axiall PVC 7465 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| ELASTOSIL® LR 3856/20 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| Hytrel® 4068FG | DuPont Performance Polymers | TPC-ET | Hytrel® |
