Index
About
Search
Contact Us
Order Products​ : sales@su-jiao.com

Santoprene™ 201-55

Category: TPV , Thermoplastic Vulcanizate
Manufacturer: ExxonMobil Chemical
Trademark: Santoprene™
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 2H2gsa_Santoprene-201-55.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
It is a soft, colorable, universal thermoplastic vulcanized elastomer (TPV) in the thermoplastic elastomer (TPE) series. This material has good physical properties and chemical resistance at the same time, and is suitable for a wide range of fields. This brand of Sanduping TPV is a shear rate dependent product that can be processed on conventional thermoplastic injection molding or extrusion molding equipment. This is a polyolefin-based material that can be recycled in the production process.
General Information
Features
  • Good dimensional stability
  • Low compressive deformability
  • Insulation
  • Recyclable materials
  • Good electrical performance
  • Good creep resistance
  • Good heat aging resistance
  • Good coloring
  • Ozone resistance
  • Good chemical resistance
  • Fatigue resistance
Uses
  • Electrical components
  • Washer
  • Diaphragm
  • Pipe fittings
  • Home appliance components
  • Seals
  • Parts under the hood of a car
  • Application in Automobile Field
  • Consumer goods application field
Agency Ratings
  • UL QMFZ2
  • UL QMFZ8
RoHS Compliance
  • RoHS compliance
UL File Number
  • E80017
Appearance
  • Natural color
Forms
  • Particle
Processing Method
  • Multiple injection molding
  • Co-extrusion molding
  • Extrusion
  • Sheet extrusion molding
  • Profile extrusion molding
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity
    -- 0.968g/cm³ASTM D792
    -- 0.970g/cm³ISO 1183
Detergent Resistance f4UL 2157
Detergent Resistance f3UL 749
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shaw A, 15 seconds, 23°C, 2.00mm)59ISO 868
ElastomersNominal ValueUnitTest Method
Tensile Stress - Across Flow (100% Strain, 23°C)2.10MPaASTM D412, ISO 37
Tensile Strength - Across Flow (Break, 23°C)5.20MPaASTM D412, ISO 37
Tensile Elongation - Across Flow (Break, 23°C)400%ASTM D412, ISO 37
Tear Strength - Across Flow
    23°C 116.0kN/mASTM D624
    23°C 216kN/mISO 34-1
Compression Set
    70°C, 22 hr 322%ASTM D395B
    125°C, 70 hr 438%ASTM D395B
    70°C, 22 hr 522%ISO 815
    125°C, 70 hr 638%ISO 815
AgingNominal ValueUnitTest Method
Change in Tensile Strength in Air (150°C, 168 hr)-7.0%ASTM D573, ISO 188
Change in Ultimate Elongation in Air (150°C, 168 hr)13%ASTM D573, ISO 188
Change in Durometer Hardness in Air (Shore A, 150°C, 168 hr)3.0ASTM D573, ISO 188
Change in Tensile Strength
    5°C, 166 hr, in Freon®11 in 0.0%ASTM D471, ISO 1817
    23°C, 166 hr, in 10% zinc chloride 2.0%ASTM D471, ISO 1817
    23°C, 166 hr, in 1-propanol 8.0%ASTM D471, ISO 1817
    23°C, 166 hr, in pyridine 2.0%ASTM D471, ISO 1817
    23°C, 166 hr, in n-butyl acrylate 16%ASTM D471, ISO 1817
    23°C, 166 hr, in dimethylformamide -4.0%ASTM D471, ISO 1817
    23°C, 166 hr, in glycerol -5.0%ASTM D471, ISO 1817
    23°C, 166 hr, in seawater 3.0%ASTM D471, ISO 1817
    23°C, 166 hr, in reference fuel A -9.0%ASTM D471
    23°C, 166 hr, in reference fuel C -25%ASTM D471, ISO 1817
    23°C, 166 hr, in lithium-based grease -9.0%ASTM D471, ISO 1817
    23°C, 166 hr, in dioctyl phthalate 11%ASTM D471, ISO 1817
    23°C, 166 hr, in turpentine -27%ASTM D471, ISO 1817
    23°C, 166 hr, in bromobenzene -30%ASTM D471, ISO 1817
    23°C, 166 hr, in hydraulic brake fluid -6.0%ASTM D471, ISO 1817
    23°C, 166 hr, in ether 3.0%ASTM D471, ISO 1817
    23°C, 166 hr, in n-hexane 14%ASTM D471, ISO 1817
    23°C, 168 hr, in 10% hydrochloric acid -9.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 15% sodium chloride -10%ASTM D471, ISO 1817
    23°C, 168 hr, in 2.5% detergent (Tide) -19%ASTM D471, ISO 1817
    23°C, 168 hr, in 50% sodium hydroxide -9.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 95% ethanol -7.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 98% sulfuric acid -5.0%ASTM D471, ISO 1817
    23°C, 168 hr, in acetic acid -13%ASTM D471, ISO 1817
    23°C, 168 hr, in cyclohexane 15%ASTM D471, ISO 1817
    23°C, 168 hr, in methyl ethyl ketone 31%ASTM D471, ISO 1817
    23°C, 168 hr, in isopropanol 12%ASTM D471, ISO 1817
    100°C, 166 hr, in ASTM #1 oil -13%ASTM D471, ISO 1817
    100°C, 166 hr, in lithium grease -25%ASTM D471, ISO 1817
    100°C, 168 hr, in IRM 903 oil -40%ASTM D471, ISO 1817
    100°C, 168 hr, in deionized water -11%ASTM D471, ISO 1817
    125°C, 70 hr, in IRM 903 oil -8.0%ASTM D471, ISO 1817
    125°C, 166 hr, in Pydraul®In 312 -19%ASTM D471, ISO 1817
    125°C, 166 hr, in Sunvis®In 706 liquid -30%ASTM D471, ISO 1817
    125°C, 166 hr, in Ucon®50HB5100 -2.0%ASTM D471, ISO 1817
    125°C, 166 hr, in Ucon®In CC732 -14%ASTM D471, ISO 1817
    125°C, 166 hr, in power steering fluid -33%ASTM D471, ISO 1817
    125°C, 166 hr, in antifreeze, 50/50 ethylene glycol (Prestone®)/Water -8.0%ASTM D471, ISO 1817
    125°C, 166 hr, in automatic transmission fluid -46%ASTM D471, ISO 1817
    125°C, 168 hr, in ASTM #1 oil -29%ASTM D471, ISO 1817
    125°C, 168 hr, in IRM 903 oil -43%ASTM D471, ISO 1817
    125°C, 1000 hr, in antifreeze, 50/50V/V/water -7.0%ASTM D471, ISO 1817
    23°C, 166 hr, in reference fuel A (isooctane) -9.0%ISO 1817
Change in Ultimate Elongation
    5°C, 166 hr, in Freon®11 in -15%ASTM D471, ISO 1817
    23°C, 166 hr, in 10% zinc chloride 9.0%ASTM D471, ISO 1817
    23°C, 166 hr, in 1-propanol 24%ASTM D471, ISO 1817
    23°C, 166 hr, in pyridine 21%ASTM D471, ISO 1817
    23°C, 166 hr, in n-butyl acrylate 27%ASTM D471, ISO 1817
    23°C, 166 hr, in dimethylformamide 3.0%ASTM D471, ISO 1817
    23°C, 166 hr, in glycerol 0.0%ASTM D471, ISO 1817
    23°C, 166 hr, in seawater 9.0%ASTM D471, ISO 1817
    23°C, 166 hr, in reference fuel A -15%ASTM D471
    23°C, 166 hr, in reference fuel C -32%ASTM D471, ISO 1817
    23°C, 166 hr, in lithium-based grease -9.0%ASTM D471, ISO 1817
    23°C, 166 hr, in dioctyl phthalate 21%ASTM D471, ISO 1817
    23°C, 166 hr, in turpentine -32%ASTM D471, ISO 1817
    23°C, 166 hr, in bromobenzene -35%ASTM D471, ISO 1817
    23°C, 166 hr, in hydraulic brake fluid 3.0%ASTM D471, ISO 1817
    23°C, 166 hr, in ether -3.0%ASTM D471, ISO 1817
    23°C, 166 hr, in n-hexane 27%ASTM D471, ISO 1817
    23°C, 168 hr, in 10% hydrochloric acid 0.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 15% sodium chloride -5.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 2.5% detergent (Tide) -15%ASTM D471, ISO 1817
    23°C, 168 hr, in 50% sodium hydroxide 0.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 95% ethanol 3.0%ASTM D471, ISO 1817
    23°C, 168 hr, in 98% sulfuric acid -18%ASTM D471, ISO 1817
    23°C, 168 hr, in acetic acid -8.0%ASTM D471, ISO 1817
    23°C, 168 hr, in cyclohexane 28%ASTM D471, ISO 1817
    23°C, 168 hr, in methyl ethyl ketone 51%ASTM D471, ISO 1817
    23°C, 168 hr, in isopropanol 28%ASTM D471, ISO 1817
    23°C, 168 hr, in trichloroethylene 36 36%ASTM D471, ISO 1817
    100°C, 166 hr, in ASTM #1 oil -18%ASTM D471, ISO 1817
    100°C, 166 hr, in lithium grease -26%ASTM D471, ISO 1817
    100°C, 168 hr, in IRM 903 oil -56%ASTM D471, ISO 1817
    100°C, 168 hr, in deionized water -10%ASTM D471, ISO 1817
    125°C, 70 hr, in IRM 903 oil -48%ASTM D471, ISO 1817
    125°C, 166 hr, in Pydraul®In 312 -15%ASTM D471, ISO 1817
    125°C, 166 hr, in Sunvis®In 706 liquid -35%ASTM D471, ISO 1817
    125°C, 166 hr, in Ucon®50HB5100 9.0%ASTM D471, ISO 1817
    125°C, 166 hr, in Ucon®In CC732 -9.0%ASTM D471, ISO 1817
    125°C, 166 hr, in power steering fluid -41%ASTM D471, ISO 1817
    125°C, 166 hr, in antifreeze, 50/50 ethylene glycol (Prestone®)/Water -6.0%ASTM D471, ISO 1817
    125°C, 166 hr, in automatic transmission fluid -53%ASTM D471, ISO 1817
    125°C, 168 hr, in ASTM #1 oil -43%ASTM D471, ISO 1817
    125°C, 168 hr, in IRM 903 oil -56%ASTM D471, ISO 1817
    125°C, 1000 hr, in antifreeze, 50/50V/V/water -21%ASTM D471, ISO 1817
    23°C, 166 hr, in reference fuel A (isooctane) -15%ISO 1817
Change in Durometer Hardness
    Support A, 5°C, 166 hr, in Freon®11 in -15ASTM D471
    Support A, 23°C, 166 hr, in 10% zinc chloride -2.0ASTM D471
    Support A, 23°C, 166 hr, in 1-propanol 2.0ASTM D471
    Support A, 23°C, 166 hr, in pyridine 2.0ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in n-butyl acrylate -1.0ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in dimethylformamide -8.0ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in glycerin -4.0ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in seawater -1.0ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in reference fuel A -13ASTM D471
    Support A, 23°C, 166 hr, in reference fuel C -17ASTM D471
    Support A, 23°C, 166 hr, in lithium-based grease -7.0ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in dioctyl phthalate -1.0ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in turpentine -16ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in bromobenzene -15ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in hydraulic brake fluid -3.0ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in ether -12ASTM D471, ISO 1817
    Support A, 23°C, 166 hr, in n-hexane -9.0ASTM D471, ISO 1817
    Support A, 23°C, 168 hr, in 10% hydrochloric acid 1.0ASTM D471
    Support A, 23°C, 168 hr, in 15% sodium chloride 2.0ASTM D471
    Support A, 23°C, 168 hr, in 2.5% detergent (Tide) 1.0ASTM D471
    Support A, 23°C, 168 hr, in 50% sodium hydroxide 1.0ASTM D471
    Support A, 23°C, 168 hr, in 95% ethanol 0.0ASTM D471
    Support A, 23°C, 168 hr, in 98% sulfuric acid 0.0ASTM D471
    Support A, 23°C, 168 hr, in acetic acid -2.0ASTM D471, ISO 1817
    Support A, 23°C, 168 hr, in cyclohexane -16ASTM D471, ISO 1817
    Support A, 23°C, 168 hr, in methyl ethyl ketone 9.0ASTM D471, ISO 1817
    Support A, 23°C, 168 hr, in isopropyl alcohol 4.0ASTM D471, ISO 1817
    Support A, 23°C, 168 hr, in trichloroethylene -1.0ASTM D471, ISO 1817
    Support A, 100°C, 166 hr, in ASTM #1 oil -12ASTM D471
    Support A, 100°C, 166 hr, in lithium-based grease -14ASTM D471, ISO 1817
    Support A, 100°C, 168 hr, in IRM 903 oil -22ASTM D471
    Support A, 100°C, 168 hr, in deionized water -2.0ASTM D471, ISO 1817
    Support A, 125°C, 70 hr, in IRM 903 oil -23ASTM D471
    Support A, 125°C, 166 hr, in Pydraul®In 312 -8.0ASTM D471
    Support a, 125°C, 166 hr, in Sunvis®In 706 liquid -15ASTM D471
    Support A, 125°C, 166 hr, in Ucon®50HB5100 2.0ASTM D471
    Support A, 125°C, 166 hr, in Ucon®In CC732 -8.0ASTM D471
    Support A, 125°C, 166 hr, in power steering fluid -20ASTM D471, ISO 1817
    Support A, 125°C, 166 hr, in antifreeze, 50/50 ethylene glycol (Prestone®)/Water -6.0ASTM D471
    Support A, 125°C, 166 hr, in automatic transmission fluid -18ASTM D471, ISO 1817
    Support A, 125°C, 168 hr, in ASTM #1 oil -17ASTM D471
    Support A, 125°C, 168 hr, in IRM 903 oil -27ASTM D471
    Support A, 125°C, 1000 hr, in antifreeze, 50/50V/V/water -4.0ASTM D471, ISO 1817
    Support A, 5°C, 166 hr, in Freon®11 in -15ISO 1817
    Support A, 23°C, 166 hr, in 10% zinc chloride -2.0ISO 1817
    Support A, 23°C, 166 hr, in 1-propanol 2.0ISO 1817
    Support A, 23°C, 166 hr, in reference fuel A (isooctane) -13ISO 1817
    Support A, 23°C, 166 hr, in reference fuel C (isooctane/toluene, 50/50) -17ISO 1817
    Support A, 23°C, 168 hr, in 10% hydrochloric acid 1.0ISO 1817
    Support A, 23°C, 168 hr, in 15% sodium chloride 2.0ISO 1817
    Support A, 23°C, 168 hr, in 2.5% detergent (Tide) 1.0ISO 1817
    Support A, 23°C, 168 hr, in 50% sodium hydroxide 1.0ISO 1817
    Support A, 23°C, 168 hr, in 95% ethanol 0.0ISO 1817
    Support A, 23°C, 168 hr, in 98% sulfuric acid 0.0ISO 1817
    Support A, 100°C, 166 hr, in ASTM #1 oil -12ISO 1817
    Support A, 100°C, 168 hr, in IRM 903 oil -22ISO 1817
    Support A, 125°C, 70 hr, in IRM 903 oil -23ISO 1817
    Support A, 125°C, 166 hr, in Pydraul®In 312 -8.0ISO 1817
    Support a, 125°C, 166 hr, in Sunvis®In 706 liquid -15ISO 1817
    Support A, 125°C, 166 hr, in Ucon®50HB5100 2.0ISO 1817
    Support A, 125°C, 166 hr, in Ucon®In CC732 -8.0ISO 1817
    Support A, 125°C, 166 hr, in antifreeze, 50/50 ethylene glycol (Prestone®)/Water -6.0ISO 1817
    Support A, 125°C, 168 hr, in ASTM #1 oil -17ISO 1817
    Support A, 125°C, 168 hr, in IRM 903 oil -27ISO 1817
Change in Mass ASTM D471
    5°C, 166 hr, in Freon®11 in 140%ASTM D471
    23°C, 166 hr, in 10% zinc chloride 0.40%ASTM D471
    23°C, 166 hr, in 1-propanol -16%ASTM D471
    23°C, 166 hr, in pyridine -16%ASTM D471
    23°C, 166 hr, in n-butyl acrylate -12%ASTM D471
    23°C, 166 hr, in reference fuel A (isooctane) 37%ASTM D471
    23°C, 166 hr, in dimethylformamide 4.5%ASTM D471
    23°C, 166 hr, in glycerol 1.3%ASTM D471
    23°C, 166 hr, in seawater 0.50%ASTM D471
    23°C, 166 hr, in reference fuel C 69%ASTM D471
    23°C, 166 hr, in lithium-based grease 12%ASTM D471
    23°C, 166 hr, in dioctyl phthalate -9.0%ASTM D471
    23°C, 166 hr, in turpentine 84%ASTM D471
    23°C, 166 hr, in bromobenzene 120%ASTM D471
    23°C, 166 hr, in hydraulic brake fluid 0.20%ASTM D471
    23°C, 166 hr, in ether 13%ASTM D471
    23°C, 166 hr, in n-hexane -13%ASTM D471
    23°C, 168 hr, in 10% hydrochloric acid -0.40%ASTM D471
    23°C, 168 hr, in 15% sodium chloride 0.20%ASTM D471
    23°C, 168 hr, in 2.5% detergent (Tide) 0.90%ASTM D471
    23°C, 168 hr, in 50% sodium hydroxide -0.40%ASTM D471
    23°C, 168 hr, in 95% ethanol 0.40%ASTM D471
    23°C, 168 hr, in 98% sulfuric acid 4.5%ASTM D471
    23°C, 168 hr, in acetic acid 7.0%ASTM D471
    23°C, 168 hr, in cyclohexane -3.7%ASTM D471
    23°C, 168 hr, in methyl ethyl ketone -31%ASTM D471
    23°C, 168 hr, in isopropanol -19%ASTM D471
    23°C, 168 hr, in trichloroethylene -14%ASTM D471
    100°C, 166 hr, in ASTM #1 oil 35%ASTM D471
    100°C, 166 hr, in lithium grease 43%ASTM D471
    100°C, 168 hr, in IRM 903 oil 92%ASTM D471
    100°C, 168 hr, in deionized water 6.6%ASTM D471
    125°C, 166 hr, in Pydraul®In 312 18%ASTM D471
    125°C, 166 hr, in Sunvis®In 706 liquid 58%ASTM D471
    125°C, 166 hr, in Ucon®50HB5100 -19%ASTM D471
    125°C, 166 hr, in Ucon®In CC732 11%ASTM D471
    125°C, 166 hr, in power steering fluid 72%ASTM D471
    125°C, 166 hr, in antifreeze, 50/50 ethylene glycol (Prestone®)/Water 6.8%ASTM D471
    125°C, 166 hr, in automatic transmission fluid 62%ASTM D471
    125°C, 168 hr, in ASTM #1 oil 54%ASTM D471
    125°C, 168 hr, in IRM 903 oil 99%ASTM D471
    125°C, 1000 hr, in antifreeze, 50/50V/V/water 13%ASTM D471
Change in Mass ISO 1817
    23.0°C, 168 hr, in methyl ethyl ketone -31%ISO 1817
    23.0°C, 168 hr, in isopropanol -19%ISO 1817
    125°C, 166 hr, in Ucon®50HB5100 -19%ISO 1817
    23.0°C, 166 hr, in pyridine -16%ISO 1817
    23.0°C, 166 hr, in 1-propanol -16%ISO 1817
    23.0°C, 168 hr, in trichloroethylene -14%ISO 1817
    23.0°C, 166 hr, in n-hexane -13%ISO 1817
    23.0°C, 166 hr, in n-butyl acrylate -12%ISO 1817
    23.0°C, 166 hr, in dioctyl phthalate -9.0%ISO 1817
    23.0°C, 168 hr, in cyclohexane -3.7%ISO 1817
    23.0°C, 168 hr, in 50% sodium hydroxide -0.40%ISO 1817
    23.0°C, 168 hr, in 10% hydrochloric acid -0.40%ISO 1817
    23.0°C, 166 hr, in hydraulic brake fluid 0.20%ISO 1817
    23.0°C, 168 hr, in 15% sodium chloride 0.20%ISO 1817
    23.0°C, 168 hr, in 95% ethanol 0.40%ISO 1817
    23.0°C, 166 hr, in 10% zinc chloride 0.40%ISO 1817
    23.0°C, 166 hr, in seawater 0.50%ISO 1817
    23.0°C, 168 hr, in 2.5% detergent (Tide) 0.90%ISO 1817
    23.0°C, 166 hr, in glycerol 1.3%ISO 1817
    23.0°C, 166 hr, in dimethylformamide 4.5%ISO 1817
    23.0°C, 168 hr, in 98% sulfuric acid 4.5%ISO 1817
    100°C, 168 hr, in deionized water 6.6%ISO 1817
    125°C, 166 hr, in antifreeze, 50/50 ethylene glycol (Prestone®)/Water 6.8%ISO 1817
    23.0°C, 168 hr, in acetic acid 7.0%ISO 1817
    125°C, 166 hr, in Ucon®In CC732 11%ISO 1817
    23.0°C, 166 hr, in lithium grease 12%ISO 1817
    23.0°C, 166 hr, in ether 13%ISO 1817
    125°C, 1000 hr, in antifreeze, 50/50V/V/water 13%ISO 1817
    125°C, 166 hr, in Pydraul®In 312 18%ISO 1817
    100°C, 166 hr, in ASTM #1 oil 35%ISO 1817
    23.0°C, 166 hr, in reference fuel a 37%ISO 1817
    100°C, 166 hr, in lithium grease 43%ISO 1817
    125°C, 168 hr, in ASTM #1 oil 54%ISO 1817
    125°C, 166 hr, in Sunvis®In 706 liquid 58%ISO 1817
    125°C, 166 hr, in automatic transmission fluid 62%ISO 1817
    23.0°C, 166 hr, in reference fuel c 69%ISO 1817
    125°C, 166 hr, in power steering fluid 72%ISO 1817
    23.0°C, 166 hr, in turpentine 84%ISO 1817
    100°C, 168 hr, in IRM 903 oil 92%ISO 1817
    125°C, 168 hr, in IRM 903 oil 99%ISO 1817
    23.0°C, 166 hr, in bromobenzene 120%ISO 1817
    5.00°C, 166 hr, in Freon®11 in 140%ISO 1817
Change in Volume
    125°C, 70 hr, in IRM 903 oil 97%ASTM D471
    125°C, 70 hr, in IRM 903 oil 97%ISO 1817
Continuous Upper Temperature Resistance (1008 hr)135°CSAE J2236
ThermalNominal ValueUnitTest Method
Brittleness Temperature -60.0°CASTM D746, ISO 812
RTI Elec 100°CUL 746
RTI UL 746
    1.00 mm 90.0°CUL 746
    1.50 mm 95.0°CUL 746
    3.00 mm 100°CUL 746
ElectricalNominal ValueUnitTest Method
Dielectric Strength (23°C, 2.00 mm)29kV/mmASTM D149
Dielectric Constant (23°C, 1.98 mm)2.30ASTM D150, IEC 60250
Comparative Tracking Index (CTI) PLC 0UL 746
High Amp Arc Ignition (HAI) PLC 0UL 746
High Voltage Arc Resistance to Ignition (HVAR) PLC 6UL 746
High Voltage Arc Tracking Rate (HVTR) PLC 1UL 746
Hot-wire Ignition (HWI) UL 746
    1.50 mm PLC 3UL 746
    3.00 mm PLC 2UL 746
FlammabilityNominal ValueUnitTest Method
Flame Rating UL 94
    1.00 mm HBUL 94
    1.50 mm HBUL 94
    3.00 mm HBUL 94
Additional Information
如果适用，这是基于扇形浇口注塑成型的平板测试结果。拉伸强度、伸长率和拉伸应力沿垂直流动方向测定 - ISO 1 型，ASTM die C。25% 形变时的永久压缩变形。从埃克森美孚欧洲分支机构直接购买的所有产品都符合 REACH 法规。 对于埃克森 美孚未进口至欧洲的产品，用户应自行评估其是否满足 REACH 法规。
Legal statement
未经埃克森美孚化工书面允许，这种产品包括其产品名称，不得在任何医疗应用领域予以使用或有关详细的产品监管信息，请联系客户服务。
InjectionNominal ValueUnit
Drying Temperature 82.2°C
Drying Time 3.0hr
Suggested Max Moisture 0.080%
Suggested Max Regrind 20%
Rear Temperature 177°C
Middle Temperature 182°C
Front Temperature 182°C
Nozzle Temperature 188 - 221°C
Processing (Melt) Temp 193 - 232°C
Mold Temperature 10.0 - 51.7°C
Injection Rate Fast
Back Pressure 0.345 - 0.689MPa
Screw Speed 100 - 200rpm
Clamp Tonnage 4.1 - 6.9kN/cm²
Cushion 3.18 - 6.35mm
Screw L/D Ratio 16.0:1.0 to 20.0:1.0
Screw Compression Ratio 2.0:1.0 to 2.5:1.0
Vent Depth 0.025mm
Injection instructions
Santoprene TPV与乙缩醛和PVC不相容。更多关于加工和模具设计的信息，请查阅我们的《注射成型指南》。
ExtrusionNominal ValueUnit
Drying Temperature 82.2°C
Drying Time 3.0hr
Melt Temperature 196°C
Die Temperature 199°C
Back Pressure 5.00 - 20.0MPa
Extrusion instructions
Santoprene TPV与乙缩醛和PVC不相容。更多关于加工和模具设计的信息，请查阅我们的《挤出成型指南》。
Note Message
1 .C mould
2 .Method B, right-angle specimen (cut)
3 .Type 1
4 .Type 1
5 .Type a
6 .Type a
Resin Grade Manufacturer Category Trademark
PRIME TPO J-5710 Prime Polymer Co., Ltd. PP Random Copolymer PRIME TPO
Sylvin 8200-95UV Grey 9539 Sylvin Technologies Incorporated PVC, Unspecified Sylvin
Capran® 1500M Honeywell Nylon 6 Capran®
DESLON™ 6 DSC101M6 DESCO Co., Ltd. Nylon 6 DESLON™ 6
POLIMAXX 2100N IRPC Public Company Limited PP Impact Copolymer POLIMAXX

TEL: +86-21-58958519 Email:sales@su-jiao.com

No. 215, Lianhe North Road, Fengxian District, Shanghai, China​， COPYRIGHT SUSHENG COMPANY RIGHTS RESERVED