Order Products : sales@su-jiao.com
Lushan PR298
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Guangzhou Lushan New Materials Co., Ltd |
| Trademark: | Lushan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2AyOPG_Lushan-PR298.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene Copolymer Adhesive for Steel Pipe Coating Polypropylene copolymer adhesive resin Lushan PR298 is maleic grafted polymer in granule form. It is a high tech product and was developed by Guangzhou Hot-melt Adhesive Engineering and Technical R&D Center. Polypropylene copolymer adhesive resin Lushan PR298 is used as adhesive layer between epoxy powder layer and PP compound top coats layer. Polypropylene copolymer adhesive resin Lushan PR298 been exported to many countriers all over the world, and successfully applied to wrapped coated or direct coated 3PP buried anti-corrosion steel pipe and coated steel plastic composite pipe for exploration and transportation of natural gas, oil, chemical liquids, water, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.892 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength | ISO 21809-1 | ||
| 20°C | > 20.0 | kN/m | |
| 50°C | > 15.0 | kN/m | |
| 90°C | > 10.0 | kN/m |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -20 to 110 | °C |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -30.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 130 | °C | ASTM D1525 |
| Peak Melting Temperature | 160 | °C | ASTM D2117 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene HP521-00UV | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| Michimid K4200GF33-03 | API Polymers, Inc. | Nylon 66 | Michimid |
| ALCOM庐 PA66 910/1.1 CF10 GF20 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| Andur 8-AP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| PLUSTEK PB145 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
