Order Products : sales@su-jiao.com
Westlake LDPE EC478AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 27MmsD_Westlake-LDPE-EC478AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE polyethylene EC478 is a low-density resin recommended for use in boardstock coating. This material has an excellent combination of low neck-in, ease of processing, and good chill-roll release. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 4.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 450 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 302 to 329 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ FR QD 818.Y001 | PolyOne Corporation | PP, Unspecified | Maxxam™ FR |
| Ultramid® A3WG7 HP BK20560 | BASF Corporation | Nylon 66 | Ultramid® |
| Zytel® 73G45L NC010 | DuPont Performance Polymers | Nylon 6 | Zytel® |
| HiFill® PA4/6 HS | Techmer Engineered Solutions | Nylon 46 | HiFill® |
| OP - PPS 30GF-15PTFE | Oxford Polymers | PPS | OP - PPS |
