Order Products : sales@su-jiao.com
Smooth-On PC-3®
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Smooth-On, Inc |
| Trademark: | Smooth-On |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 26dTmf_Smooth-On-PC-3-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Smooth-On PC-3® Laboratory Table Top Cement is a two-component, black epoxy resin compound designed to join, bond and caulk sections of laboratory counters and tables. This epoxy resin cement is heavily filled and will adhere to vertical surfaces without sagging. It cures at room temperature with extremely low shrinkage. PC-3® contains no volatile organic compounds (VOC's) or solvents. It is chemically stable and bonds strongly to natural and artificial stones, most metals, glass, wood and to thermosetting resins such as polyester, phenolic and epoxy. PC-3® is available in pint units (2.5 lbs.) or quart units (5.0 lbs.) and is sold in case quantities only. A case of pints contains six units and a case of quarts contains 3 units. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Specific Volume | 0.723 | cm³/g | |
| Viscosity | Paste |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Handle Time 1 | 2.0 | hr | |
| Mixing Ratio | 1A:1B by volume or weight | ||
| Tensile Shear Adhesion - to CR Steel | 20.7 | MPa | ASTM D1002 |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.30 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness 2 | 75 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 20.7 | MPa | ASTM D638 |
| Flexural Strength | 34.5 | MPa | ASTM D790 |
| Compressive Strength | 34.5 | MPa | ASTM D695 |
| Note Message | |
|---|---|
| 1 . | 0.010 in/0.0254 cm film |
| 2 . | After 24 hrs |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toughblend® PC-1600 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PC | Toughblend® |
| ESTAPROP KUR 1520 TG05 | Cossa Polimeri S.r.l. | PP Copolymer | ESTAPROP |
| KANEKA H516A | Kaneka North America LLC | CPVC | KANEKA |
| LG ABS ER451 | LG Chem Ltd. | ABS | LG ABS |
| Lotrène® LDPE FE8000 | QAPCO | LDPE | Lotrène® LDPE |
