Order Products : sales@su-jiao.com
Prixene® EA072S63
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | POLYMAT |
| Trademark: | Prixene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 26Kz38_Prixene-EA072S63.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Prixene ® EA072S63 is a high density polyethylene homopolymer, developed specifically for blow molding food containers on reciprocating screw-type equipment. It exhibits excellent processing characteristics and extremely low odor in the finished container. Typical applications include containers for distilled water, milk, juice bottles and food containers. Containers of normal and large size. The features presented are good ESCR, good impact resistance, easy processability, high rigidity and low taste and odor. The product form is in pellets and the process is apt for molding by blown and extrusion. The material complies with FDA regulation title 21.CFR177.1520 (c) 3.1a 21.CFR177.1520 (c) 3.2a |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.963 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.72 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1240 | MPa | ASTM D638 |
| Tensile Strength 1(Yield) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 600 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (73°C) | 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 84.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 132 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sipolprene® 55200 W | SIPOL S.p.A | TPC-ET | Sipolprene® |
| Cellidor CP 2825-11 | ALBIS PLASTIC GmbH | CAP | Cellidor |
| COBITECH 0 | M&G Gruppo Mossi & Ghisolfi | PET | COBITECH |
| Ethylplus 625 MD | Fainplast Compounds S.r.l | MDPE | Ethylplus |
| Formolene® 3355O | Formosa Plastics Corporation, U.S.A. | PP Random Copolymer | Formolene® |
