Order Products : sales@su-jiao.com

Addisil™ 6200

Category:	Silicone , Silicone
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Addisil™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	25XodX_Addisil-6200.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Addisil 6200 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures. Key Features and Benefits One component product - no mixing required Room temperature storage Fast cure at elevated temperature (in a range of 140°C to 200°C) Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminium, ceramic) No formation of cure by-products Non-corrosive to metals Good performance over a wide temperature range Service temperature -50°C to 200°C

Message

Addisil 6200 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.

Key Features and Benefits

One component product - no mixing required

Room temperature storage

Fast cure at elevated temperature (in a range of 140°C to 200°C)

Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminium, ceramic)

No formation of cure by-products

Non-corrosive to metals

Good performance over a wide temperature range

Service temperature -50°C to 200°C

General Information
Features	Bondability Fast Cure Good Adhesion Heat Cure Non-Corrosive
Uses	Adhesives Sealants
Appearance	White

Uncured Properties	Nominal Value	Unit
Density	1.12	g/cm³
Curing Time (175°C)	0.17	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	44
Tensile Strength	7.00	MPa
Tensile Elongation at Break	> 300	%

Resin Grade	Manufacturer	Category	Trademark
Apec® 1697	Covestro - Polycarbonates	PC	Apec®
Fainplast PVC RK 742	Fainplast Compounds S.r.l	PVC, Rigid	Fainplast PVC
ESPRENE EPDM 514F	Sumitomo Chemical Co., Ltd.	EPDM	ESPRENE EPDM
ICORENE® K1500	ICO Polymers APAC, A Division of A. Schulman	XLPE	ICORENE®
PLUSTEK PA355M6	Polyram Ram-On Industries	Nylon 66	PLUSTEK