Order Products : sales@su-jiao.com
3M™ Dyneon™ PTFE Compound TF 4302
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ PTFE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 25U37G_3M-Dyneon-PTFE-Compound-TF-4302.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.17 | g/cm³ | ISO 12086 |
| Apparent Density | 0.79 | g/cm³ | ISO 12086 |
| Average Particle Size | 580 | µm | ISO 12086 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Compression Molding Molding Pressure | 40.0 | MPa | |
| Compression Molding Temperature | 23 to 26 | °C | |
| Sintering Temperature | < 365 | °C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Break) | 22.0 | MPa | ISO 12086 |
| Tensile Strain 2(Break) | 340 | % | ISO 12086 |
| Note Message | |
|---|---|
| 1 . | Measured on sintered moldings |
| 2 . | Measured on sintered moldings |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Eastar™ AN011, Natural | Eastman Chemical Company | Copolyester | Eastar™ |
| EPO-TEK® P1011 | Epoxy Technology Inc. | PI, TS | EPO-TEK® |
| HFDB-4201 SC sb K | The Dow Chemical Company | XLPE | 3M™ Dyneon™ Fluoroelastomer |
| IROSTIC® S 6514 | Huntsman Corporation | TPU, Unspecified | IROSTIC® |
| Sumiliteresin® PR-50099 I | SBHPP | Phenolic | Sumiliteresin® |
