Order Products : sales@su-jiao.com
NAXELL™ PC110-919
| Category: | PC , Polycarbonate |
| Manufacturer: | MRC Polymers, Inc. |
| Trademark: | NAXELL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 23wYBp_NAXELL-PC110-919.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NAXELL™ PC110-919 is a Polycarbonate (PC) material. It is available in North America. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 15 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 to 0.70 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.15 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C, 3.20 mm) | 62.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C, 3.20 mm) | 60 | % | ASTM D638 |
| Flexural Modulus (23°C, 3.20 mm) | 2340 | MPa | ASTM D790 |
| Flexural Strength (23°C, 3.20 mm) | 96.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 850 | J/m | ASTM D256 |
| Instrumented Dart Impact 1(23°C, 3.20 mm, Total Energy) | 61.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.20 mm | 135 | °C | |
| 1.8 MPa, Unannealed, 3.20 mm | 125 | °C | |
| CLTE - Flow (-40 to 35°C) | 6.8E-5 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | 3.35 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALLOY® B1900 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | PRIMALLOY® |
| Tarnamid® T- 27 GF 60 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Ultradur® B 4300 K6 | BASF Corporation | PBT | Ultradur® |
| NANCAR® 1031 | Nantex Industry Co., Ltd. | NBR | NANCAR® |
| TECHNYL® C 216 V18 NATURAL | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
