Order Products : sales@su-jiao.com
MELMEX SMX
| Category: | Mel Formald , Melamine Formaldehyde |
| Manufacturer: | BIP (Oldbury) Limited |
| Trademark: | MELMEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1vle0B_MELMEX-SMX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Modified technical melamine with improved high temperature stability, lower distortion and reduced flow lines in comparison with urea powders. Suitable for the production of a wide range of articles where surface appearance is particularly important - e.g electrical accessories. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.53 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | 0.75 | % | ISO 2577 |
| Water Absorption | ISO 62 | ||
| Cold 2 | 37.0 | mg | |
| Hot 3 | 105.0 | mg | |
| Post Shrinkage 4 | 0.70 | % | ISO 2577 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress | 99.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 2.2 | kJ/m² | ISO 180/C |
| Unnotched Izod Impact Strength | 8.5 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 164 | °C | ISO 75-2/Ae |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Electric Strength 5 | 5.9 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | > 600 | V | IEC 60167 |
| Note Message | |
|---|---|
| 1 . | Preheated powder |
| 2 . | 24 hr @ 23°C |
| 3 . | 30 min @ 100°C |
| 4 . | (48 hr) Preheated powder |
| 5 . | (90°C) Preheated powder |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SOLLAMID A 2700 - A 2730 FV 15 | Krisoll Resinas Plásticas Ltda. | Nylon 66 | SOLLAMID |
| TRIBOCOMP® PA6 GF40 TS5 | EPIC Polymers | Nylon 6 | TRIBOCOMP® |
| BioFibra® BF-LUD01 | FuturaMat | Biodeg Polymers | BioFibra® |
| Durethan® DP BM 65 X FM30 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
| IDI SMC S10 (Glass Content 20%) | IDI Composites International | TS, Unspecified | IDI SMC |
