Order Products : sales@su-jiao.com
MTEGRITY™ LLDPE LL107AH
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | M. Holland Company |
| Trademark: | MTEGRITY™ LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1vgSGS_MTEGRITYLLDPELL107AH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Linear Low Density Polyethylene
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 0.75 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Break, 25 µm | 40.7 | MPa | ASTM D882 |
| TD : Break, 25 µm | 33.1 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 650 | % | ASTM D882 |
| TD : Break, 25 µm | 950 | % | ASTM D882 |
| Dart Drop Impact (25 µm) | 550 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 400 | g | ASTM D1922 |
| TD : 25 µm | 700 | g | ASTM D1922 |
| Additional Information |
|---|
| * Film properties based on 1 mil film with 3:1 BUR. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AFFINITY™ SL 8110G | The Dow Chemical Company | POP | AFFINITY™ |
| EMOPLEN® CP MTF 20 IM | EMAS Plastik San.Tic.AS. | PP Copolymer | EMOPLEN® |
| LEXAN™ HPH4304 resin | SABIC Innovative Plastics | PC+PPC | LEXAN™ |
| ISPLEN® PB 141 G2M | REPSOL | PP Impact Copolymer | ISPLEN® |
| Plenco 08218 (Compression) | Plastics Engineering Co. | Polyester, TS | Plenco |
