Order Products : sales@su-jiao.com
Sumikon® PM-9610 (Injection)
| Category: | Phenolic , Phenolic |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1sA37t_Sumikon-PM-9610-Injection-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Durez "SUMIKON" PM-9610 black Phenolic is a two stage glass and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and higher dimensional stability with excellent heat resistance. Typical applications include brush holders for high temperature, and timing pulleys. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.02 | g/cm³ | ASTM D792 |
| Apparent Density | 0.96 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow | 0.25 | % | ASTM D6289 |
| Water Absorption | 0.030 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 24800 | MPa | ASTM D638 |
| Tensile Strength | 96.0 | MPa | ASTM D638 |
| Flexural Strength | 172 | MPa | ASTM D790 |
| Compressive Strength | 241 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 21 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 210 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | ASTM D149 | ||
| -- 1 | 15 | kV/mm | |
| -- 2 | 9.8 | kV/mm | |
| Dielectric Constant (1 MHz) | 4.90 | ASTM D2520 | |
| Dissipation Factor (1 MHz) | 0.030 | ASTM D150 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life | 52 | wk |
| Note Message | |
|---|---|
| 1 . | Method A (Short-Time) |
| 2 . | Method B (Step-by-Step) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ASI POLYETHYLENE CP 831-01 | A. Schulman Inc. | LDPE | ASI POLYETHYLENE |
| Durethan® AKV 30 G H2.0 SR1 900051 | LANXESS GmbH | Nylon 66 | Durethan® |
| Haprez™ 3749 | Hapco Inc. | TP, Unspecified | Haprez™ |
| INEOS LDPE 28H430 | INEOS Olefins & Polymers Europe | LDPE | INEOS LDPE |
| KEBAFORM® C 904 GB | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
