Order Products : sales@su-jiao.com
Durethan® BG 60 X XF 900116
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | LANXESS GmbH |
| Trademark: | Durethan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1op7kH_DurethanBG60XXF900116.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PA 6, 60 % glass fibers/glass spheres, injection molding, heat-aging stabilized, improved flowability, low tendency to warp |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density (23°C) | 1.68 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 2577 | |||
| Vertical flow direction : 290°C, 2.00mm 1 | 0.40 | -- | % | ISO 2577 |
| Vertical flow direction : 120°C, 4 hours, 2.00mm 2 | 0.050 | -- | % | ISO 2577 |
| Flow direction : 290°C, 2.00mm 3 | 0.35 | -- | % | ISO 2577 |
| Flow direction : 120°C, 4 hours, 2.00mm 4 | 0.050 | -- | % | ISO 2577 |
| Vertical flow direction : 280°C, 3.00mm 5 | 0.55 | -- | % | ISO 2577 |
| Vertical flow direction : 120°C, 4 hours, 3.00mm 6 | 0.10 | -- | % | ISO 2577 |
| Flow direction : 280°C, 3.00mm 7 | 0.20 | -- | % | ISO 2577 |
| Flow direction : 120°C, 4 hours, 3.00mm 8 | 0.050 | -- | % | ISO 2577 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 19000 | 12300 | MPa | ISO 527-2/1 |
| Tensile Stress (Break, 23°C) | 210 | 135 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | 2.2 | 3.3 | % | ISO 527-2/5 |
| Flexural Modulus 9(23°C) | 18000 | 12000 | MPa | ISO 178/A |
| Flexural Stress 10(23°C) | 340 | 210 | MPa | ISO 178/A |
| Flexural Strain at Flexural Strength 11(23°C) | 2.5 | 3.0 | % | ISO 178/A |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Shortname | PA 6, GHR, 10-190, (GF+GB) 60 | -- | ISO 1874 |
| Injection | Dry | Unit | Test Method |
|---|---|---|---|
| Residual Moisture Content | 0.030 - 0.20 | % | Karl Fisher |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 15 | 15 | kJ/m² | ISO 179/1eA |
| 23°C | 15 | 20 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 75 | 70 | kJ/m² | ISO 179/1eU |
| 23°C | 85 | 75 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | ISO 180/1A | |||
| -30°C | 15 | 15 | kJ/m² | ISO 180/1A |
| 23°C | 15 | 20 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength | ISO 180/1U | |||
| -30°C | 75 | 65 | kJ/m² | ISO 180/1U |
| 23°C | 80 | 70 | kJ/m² | ISO 180/1U |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 218 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 210 | -- | °C | ISO 75-2/A |
| Melting Temperature 12 | 221 | -- | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow : 23 to 55°C | 1.1E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral : 23 to 55°C | 8.5E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Injection | Dry | Unit | Test Method |
|---|---|---|---|
| Drying Temperature - Dry Air Dryer | 80.0 | °C | |
| Drying Time - Dry Air Dryer | 2.0 - 6.0 | hr | |
| Processing (Melt) Temp | 270 - 290 | °C | |
| Mold Temperature | 80.0 - 120 | °C |
| Note Message | |
|---|---|
| 1 . | 60x60x2mm, 80°C MT, 600 bar |
| 2 . | 60x60x2mm |
| 3 . | 60x60x2mm, 80°C MT, 600 bar |
| 4 . | 60x60x2mm |
| 5 . | 150x105x3mm, 80°C MT, 500 bar |
| 6 . | 150x105x3mm |
| 7 . | 150x105x3mm, 80°C MT, 500 bar |
| 8 . | 150x105x3mm |
| 9 . | 2.0 mm/min |
| 10 . | 2.0 mm/min |
| 11 . | 2 mm/min |
| 12 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANAMID 6 B12^ NH9L | Polykemi AB | Nylon 6 | SCANAMID 6 |
| Vyncolit® X6360 | Vyncolit N.V. | Phenolic | Vyncolit® |
| VECTOR® 4213A | Dexco Polymers LP | SIS+SI | VECTOR® |
| ADMER™ NF538E | Mitsui Chemicals Europe GmbH | LLDPE | ADMER™ |
| VALOX™ EH7020HF resin | SABIC Innovative Plastics Asia Pacific | PBT+PET | VALOX™ |
