Order Products : sales@su-jiao.com
RELENE® M60075
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1nR9gc_RELENE-M60075.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| M60075 is a High Density Polyethylene (HDPE) grade suitable for injection moulding applications where good mechanical properties are essential with gloss, dimensional stability, good ESCR, required for technical mouldings like moulded crates, luggage shells, helmets, defence applications, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 69 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 800 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 900 | MPa | ASTM D790 |
| Flexural Strength (Yield, Injection Molded) | 30.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 88 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premier HD08061 | Premier Polymers, LLC. | HDPE | Premier |
| RABALON® MJ6301C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| TEKAFIN™ PB75R10 | Mando Advanced Materials Co., Ltd. | PP, Unspecified | TEKAFIN™ |
| Bergamid™ B700 UF NC108 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Elastollan® 1190 A | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
