Order Products : sales@su-jiao.com
Retpol® PDR 1043 HS
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | PolyPacific Pty. Ltd. |
| Trademark: | Retpol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1ldqwU_Retpol-PDR-1043-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Corton PDR 1043 HS is a 40% talc filled homopolymer polypropylene compound. It is a high flow injection moulding grade developed for rigid components requiring improved HDT and dimensional stability at elevated temperatures. It is stabilised to meet automotive heat ageing requirements. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.00 mm) | 0.70 to 0.90 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 3.00 mm) | 105 | ASTM D785 | |
| Durometer Hardness | ASTM D2240 | ||
| Shore D, 3.00 mm | 81 | ||
| Shore D, 15 sec, 3.00 mm | 75 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(3.00 mm) | 35.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.00 mm) | 4.0 | % | ASTM D638 |
| Flexural Modulus (3.00 mm) | 4670 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.00 mm) | 17 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.00 mm) | 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.00 mm | 148 | °C | |
| 1.8 MPa, Unannealed, 3.00 mm | 102 | °C | |
| CLTE - Flow (-30 to 30°C, 3.00 mm) | 6.0E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 to 120 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Regrind | 10 | % | |
| Processing (Melt) Temp | 200 to 260 | °C | |
| Mold Temperature | 20.0 to 60.0 | °C | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nordbak Pneu Wear | Loctite® | Epoxy | Nordbak |
| EVALENE® HDPE HF14462 | JG Summit Petrochemical Corporation | HDPE | EVALENE® HDPE |
| EVAL™ J171 | Kuraray Co., Ltd. | EVOH | EVAL™ |
| Latiohm 66-05 PD01 G/20 | LATI S.p.A. | Nylon 66 | Latiohm |
| Sylvin 9940-60 NATURAL | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
