Order Products : sales@su-jiao.com
Eraclene® MM 70 U
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Versalis S.p.A. |
| Trademark: | Eraclene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1dCBRn_Eraclene-MM-70-U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Eraclene MM 70 U is a high density polyethylene resin (HDPE) with antioxidants, suitable for injection moulding application. Eraclene MM 70 U is characterized by a good balance between rigidity and impact resistance. Main Application Eraclene MM 70 U is specifically designed for pails, lids for light-weight containers, agricultural containers, houseware and dustbins. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 4.5 | g/10 min | |
| 190°C/5.0 kg | 12 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Compression Molded) | 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Compression Molded | 26.0 | MPa | |
| Break, Compression Molded | 19.0 | MPa | |
| Tensile Strain (Break, Compression Molded) | 600 | % | ISO 527-2 |
| Flexural Modulus (Compression Molded) | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Compression Molded) | 130 | J/m | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ISO 306/A |
| Melting Temperature | 134 | °C | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 220 to 275 | °C | |
| Middle Temperature | 220 to 275 | °C | |
| Front Temperature | 220 to 275 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYSTONE® Play-Tec | Röchling Engineering Plastics SE & Co. KG | TP, Unspecified | POLYSTONE® |
| RheTech Thermoplastic Polyolefin FT2500-01UVA | RheTech, Inc. | Polyolefin, Unspecified | RheTech Thermoplastic Polyolefin |
| SKYPET® BR | SK Chemicals | Polyester, TP | SKYPET® |
| Jackdaw PC DX20NT6460 | Jackdaw Polymers | PC | Jackdaw PC |
| OTECH PVC OW840 - Connector | OTECH Corporation | PVC, Unspecified | OTECH PVC |
