Order Products : sales@su-jiao.com
EMOPLEN® HP-R MTF 40
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | EMAS Plastik San.Tic.AS. |
| Trademark: | EMOPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1csEhC_EMOPLEN-HP-R-MTF-40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polypropylene %40 talcum filled |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 to 1.26 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 to 20 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.80 to 0.90 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 65 to 70 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3000 to 5000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 35.0 to 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 6.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | > 6.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 95.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 105 | °C | ISO 306/B |
| Melting Temperature (DSC) | 160 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pyramid™ PEEK KD2000-R02 | Polymics, Ltd. | PEEK | Pyramid™ PEEK |
| Sunny® PET EN130 | Guangdong Shunde Shunyan New Material Co., Ltd. | PET | Sunny® |
| Westlake LDPE EM811AA | Westlake Chemical Corporation | LDPE | Westlake LDPE |
| Pibifor® K2 GF/30 NATURALE | SO.F.TER. SPA | PBT | Pibifor® |
| Plastiglas Stonia® | Plastiglas de Mexico S.A de C.V. | Acrylic, Unspecified | Plastiglas |
