Order Products : sales@su-jiao.com
RTP 384
| Category: | PC , Polycarbonate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1begUA_RTP-384.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.10 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 15200 | MPa | ASTM D638 |
| Tensile Strength | 158 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 2.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 13800 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 241 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 530 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 149 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 143 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+5 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 249 to 293 | °C | |
| Middle Temperature | 249 to 293 | °C | |
| Front Temperature | 249 to 293 | °C | |
| Mold Temperature | 66.0 to 93.0 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUPRAN® LFT PP 1340E | SAMBARK | PP, Unspecified | SUPRAN® LFT PP |
| Chemical Resources LLD100929 | Chemical Resources, Inc. | LLDPE | Chemical Resources |
| EMERGE™ PC 8410-31 | Trinseo | PC | EMERGE™ |
| INNOPOL® PP CS 2-3522 TO BU | Inno-Comp Ltd. | PP Copolymer | INNOPOL® PP |
| MAJORIS DG264 | AD majoris | PP Copolymer | MAJORIS |
