Order Products : sales@su-jiao.com
Jampilen HA701T
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Jam Polypropylene Company |
| Trademark: | Jampilen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1aYa4H_Jampilen-HA701T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jampilen HA701T is very high flow polypropylene type which features an extremely high stiffness, high gloss, good transparency and improved characteristics at high temperatures. It has been especially developed for TWIM applications where high flow combined with high rigidity, high gloss and very good thermal characteristics are needed. Typical applications of Jampilen HA701T include food containers as well as any applications where high fluidity associated with high gloss and high stiffness are required. The composition of the product complies well with FDA norms and with regulations concerning food contact applications in major European countries. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 45 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 6.0 | % | ASTM D638 |
| Flexural Modulus | 2050 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 28 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 125 | °C | ASTM D648 |
| Vicat Softening Temperature | 157 | °C | ASTM D1525 1 |
| Accelerated Oven Ageing (150°C) | 360 | hr | ASTM D3012 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FF 34 D | Versalis S.p.A. | LDPE | Riblene® |
| Radilon® S 35HR 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| Shandong PP PQ02 | Shandong Dongchen Engineering Plastics Co., Ltd. | PP, Unspecified | Shandong PP |
| Hanwha Total PP FB53 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| POLYfill PPHC K9020 | Polykemi AB | PP, Unspecified | POLYfill |
