Order Products : sales@su-jiao.com
MAJORIS FW350
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1VVu9g_MAJORIS-FW350.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FW350 is a 35% mineral reinforced polypropylene compound intended for injection moulding. The product is available in both black (FW350 - 8229) and natural (FW350) but other colours can be provided on request. FW350 has been developed especially for the automotive applications and electrical/ appliance components. APPLICATIONS Products requiring very good heat resistance, high heat distortion temperature, excellent strength and stiffness, high gloss and improved surface can suitably be made from FW 350.
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 19 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.50 - 0.80 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 40.0 | MPa | ISO 527-2 |
| Fracture | 27.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 10 | % | ISO 527-2 |
| Flexural Modulus | 3700 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.3 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 126 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 81.0 | °C | ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 - 270 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Cellidor CP 300-10 YL1044-10MCX | ALBIS PLASTIC GmbH | CAP | Cellidor |
| FORMULA P ELAN XP 422 | Putsch Kunststoffe GmbH | PP+Styrenic | FORMULA P |
| Epoxies, Ect. 20-2028 | Epoxies, Etc. | PUR, Unspecified | Epoxies, Ect. |
| Kemcor HD 6095 Film | Qenos Pty Ltd | HDPE, MMW | Kemcor |
| KYDEX® T MB | SEKISUI Polymer Innovations, LLC | PMMA+PVC | KYDEX® |
