Order Products : sales@su-jiao.com

ALCUDIA® LDPE PE-022

Category:	LDPE , Low Density Polyethylene
Manufacturer:	REPSOL
Trademark:	ALCUDIA® LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1UmOvR_ALCUDIA-LDPE-PE-022.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALCUDIA® PE022 is a low density polyethylene grade of very high fluidity intended for those injection moulding applications in which toughness and good flow properties are required. Its formulation does not contain additives. TYPICAL APPLICATIONS Due to its good properties balance, ALCUDIA® PE022 is a very versatile grade and is suitable for articles of very diverse sizes: Industrial parts and components. Caps and closures. Toys. Recommended melt temperature range from 180 to 230°C. Processing conditions should be optimised for each production line.

Message

ALCUDIA® PE022 is a low density polyethylene grade of very high fluidity intended for those injection moulding applications in which toughness and good flow properties are required. Its formulation does not contain additives.

TYPICAL APPLICATIONS
Due to its good properties balance, ALCUDIA® PE022 is a very versatile grade and is suitable for articles of very diverse sizes:

Industrial parts and components.

Caps and closures.

Toys.

Recommended melt temperature range from 180 to 230°C. Processing conditions should be optimised for each production line.

General Information
Features	Additive Free Food Contact Acceptable Good Toughness High Flow
Uses	Caps Closures Industrial Applications Toys
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.915	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	70	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	40		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	8.00	MPa	ISO 527-2
Tensile Strain (Break)	120	%	ISO 527-2
Flexural Modulus	100	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	75.0	°C	ISO 306/A

Injection	Nominal Value	Unit
Processing (Melt) Temp	180 to 230	°C

Resin Grade	Manufacturer	Category	Trademark
S&E PVC GA-1061	S&E Specialty Polymers, LLC	PVC, Unspecified	S&E PVC
HiFill® PA6 GF60 HS L	Techmer Engineered Solutions	Nylon 6	HiFill®
POLYFLAM® RPP 1058UH	A. Schulman Inc.	PP, Unspecified	POLYFLAM®
Kepamid® 2340GFS	Korea Engineering Plastics Co., Ltd	Nylon 66	Kepamid®
Dow ENDURANCE™ HFDC-4202 EC	The Dow Chemical Company	LDPE	Dow ENDURANCE™