Order Products : sales@su-jiao.com
LINATHENE® LL405
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | USI Corporation |
| Trademark: | LINATHENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1USmbf_LINATHENE-LL405.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LINATHENE LL405 is a linear low density polyethylene (LLDPE) developed for rotational molding. LINATHENE LL405 has excellent environmental stress crack resistance, chemical inertness, low temperature impact strength, rigidity, toughness combined with good moldability and make this resin especially suitable for rotational molding. LINATHENE LL405 can be ground into powders then molded into large parts, such as storage tanks for chemicals or water, tool boxes, water drums, etc |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.936 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 5.3 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 18.6 | MPa | |
| Break, Compression Molded | 19.6 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 900 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 115 | °C | ASTM D1525 |
| Peak Melting Temperature | 125 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 383 TFE 10 | RTP Company | PC | RTP |
| TOTAL Polypropylene PPH 9040 | TOTAL Refining & Chemicals | PP Homopolymer | TOTAL Polypropylene |
| Forprene® 6NM901A85 | SO.F.TER. SPA | TPV | Forprene® |
| MAXAMID™ PA6MG40-BK | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
| Novalloy-S S5220 | PlastxWorld Inc. | PC+ABS | Novalloy-S |
