Order Products : sales@su-jiao.com
Garaflex™ O 9939NA NATURAL
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | Garaflex™ O |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1Ts1zk_Garaflex-O-9939NA-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GARAFLEX O 9939NA IS A PBB, PBBE, AND PBBO FREE, 105°C RATED, FLAME RETARDED, OLEFINIC THERMOPLASTIC ELASTOMER INTENDED FOR FLAT RIBBON CABLE PRIMARY AND HEAT TRACING CABLE. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 - 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.8 - 4.8 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 92 - 98 | ASTM D2240 | |
| Shaw A, 15 seconds | 90 - 96 | ASTM D2240 | |
| Shaw D | 49 - 55 | ASTM D2240 | |
| Shaw D, 15 seconds | 38 - 44 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 9.65 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 500 | % | ASTM D412 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 23°C, 1 MHz | 2.38 | ASTM D150 | |
| 23°C, 100 MHz | 2.35 | ASTM D150 | |
| 23°C, 1.00 GHz | 2.23 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 23°C, 1 MHz | 1.0E-3 | ASTM D150 | |
| 23°C, 100 MHz | 1.0E-3 | ASTM D150 | |
| 23°C, 1.00 GHz | 1.7E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 27 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 182 | °C | |
| Cylinder Zone 2 Temp. | 193 | °C | |
| Cylinder Zone 3 Temp. | 199 | °C | |
| Cylinder Zone 4 Temp. | 204 | °C | |
| Cylinder Zone 5 Temp. | 210 | °C | |
| Adapter Temperature | 210 | °C | |
| Melt Temperature | 204 - 216 | °C | |
| Die Temperature | 210 | °C |
| Extrusion instructions |
|---|
| Screw Design: Standard olefin metering screw |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnamid® T-27 GF 15I | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Unipren® Elastomers A3 PRTA010 45A UP304 | Petropol Industry and Trade of Polymers LTDA | SEBS | Unipren® Elastomers |
| Nylene® 2403 HSSP BK | Custom Resins Group | Nylon 6 | Nylene® |
| ALFATER XL® A50I 4FC0000 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| Fainplast PVC MPH 63 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
