Order Products : sales@su-jiao.com
ARMAMID® PA NE 15-1E
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Poly Plastic |
| Trademark: | ARMAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1Sltpx_ARMAMID-PA-NE-15-1E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ARMAMID®PA NE 15-1E is a polyamide 6 (nylon 6) product that contains a filler of glass fiber reinforcement. It is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.25 | g/cm³ | |
| Molding Shrinkage | 0.60 - 1.0 | % | |
| Water Absorption | |||
| 23°C, 24 hr | 1.1 | % | ISO 62 |
| Saturated, 23°C | 7.0 | % | |
| Equilibrium, 23°C, 50% RH | 2.3 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (Yield) | 140 | MPa | |
| Tensile Strain (Break) | 6.0 | % | |
| Flexural Modulus (23°C) | 4900 | MPa | |
| Flexural Stress | 184 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Notched Impact Strength (20°C) | 9.0 | kJ/m² | |
| Charpy Unnotched Impact Strength (20°C) | 40 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 150 | °C | |
| Melting Temperature | 218 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | |||
| -- 1 | 1.0E+13 | ohms | |
| -- 2 | 1.0E+15 | ohms | |
| Volume Resistivity | |||
| -- 3 | 1.0E+15 | ohms·cm | |
| -- 4 | 1.0E+17 | ohms·cm | |
| Dielectric Strength | |||
| -- 5 | 14 - 19 | kV/mm | |
| -- 6 | 22 - 25 | kV/mm |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Dry |
| 3 . | Wet |
| 4 . | Dry |
| 5 . | Wet |
| 6 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 FR UV | RTP Company | Nylon 66 | RTP |
| NEOFLON™ EC-6500 | DAIKIN AMERICA, INC. | ETFE | NEOFLON™ |
| Catalyst PS/2LRO | Solvay Specialty Polymers | Polyolefin, Unspecified | Catalyst |
| Devcon DFense Blok™ Fast Cure (FC) | Devcon | Epoxy | Devcon |
| KOPA® KN133G50BL | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
