Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic ET 6218Z

Category:	ETFE , Ethylene Tetrafluoroethylene Copolymer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1NkdwB_3M-Dyneon-Fluoroplastic-ET-6218Z.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
3M™ Dyneon™ Fluoroplastic ET 6218Z is a melt processable fluoroplastic resin, consisting mainly of alternating tetrafluoroethylene and ethylene monomer units. Its excellent properties make 3M™ Dyneon™ Fluoroplastic ET 6218Z suitable for many different industrial application as well as electronics and chemical industry. It is very well suited for the production of filaments and thin-wall injection molding parts. Features Wide service temperature range Low flammability Excellent electrical and mechanical properties Very good resistance to solvents and chemicals Extremely high resistance to outdoor weathering

Message

3M™ Dyneon™ Fluoroplastic ET 6218Z is a melt processable fluoroplastic resin, consisting mainly of alternating tetrafluoroethylene and ethylene monomer units.

Its excellent properties make 3M™ Dyneon™ Fluoroplastic ET 6218Z suitable for many different industrial application as well as electronics and chemical industry. It is very well suited for the production of filaments and thin-wall injection molding parts.

Features

Wide service temperature range

Low flammability

Excellent electrical and mechanical properties

Very good resistance to solvents and chemicals

Extremely high resistance to outdoor weathering

General Information
Features	Copolymer Good Chemical Resistance Good Electrical Properties Good Weather Resistance Solvent Resistant
Uses	Electrical/Electronic Applications Filaments Industrial Applications Thin-walled Parts
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.73	g/cm³	ISO 12086
Melt Mass-Flow Rate (MFR) (297°C/5.0 kg)	18	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	69		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break, 23°C)	40.0	MPa	ISO 527-1
Tensile Strain (Break, 23°C)	350	%	ISO 527-1

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	266	°C	ASTM D4591

Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-0		UL 94
Oxygen Index	35	%	ASTM D2863

Resin Grade	Manufacturer	Category	Trademark
Tecodur® PB70 BK001 MC	Eurotec Engineering Plastics	PBT	Tecodur®
Trithene® TS 8090	Petroquimica Triunfo	LDPE	Trithene®
ALCOM® TCD PA66 5030 14014	ALBIS PLASTIC GmbH	Nylon 66	ALCOM® TCD PA66
ALTECH® PA66 A 3030/109 GB30	ALBIS PLASTIC GmbH	Nylon 66	ALTECH® PA66
Anjacom® R250-H/GF30	Almaak International GmbH	Nylon 6	Anjacom®