Order Products : sales@su-jiao.com

NuSil R-2350

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1MM71f_NuSil-R-2350.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications. Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chemical and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Silicone Foams Comments: Flame Resistant, 22 lb/ft³ (0.350 g/cm³)

Message

As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.

Benefits of Silicone for Electronics:

Wide Operating Temperature Range of -115 °C to 250 °C

Low moisture absorption, < 0.4% Typical

Corrosion Resistance

High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm

Fillers can be added to provide thermal and electrical conductive properties

Low Modulus (Typically less than 5.5 MPa/800 psi)

Stable chemical and mechanical properties when exposed to high temperatures

Low Shrinkage

Available as gels, elastomers, film adhesives sheeting, and greases

General Purpose: Silicone Foams

Comments: Flame Resistant, 22 lb/ft³ (0.350 g/cm³)

General Information
Features	Flame Retardant Good Corrosion Resistance Good Thermal Stability Low Moisture Absorption Low Shrinkage
Uses	Electrical/Electronic Applications

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-65 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Grey
Density	0.349	g/cm³
Viscosity
-- ¹	13	Pa·s
-- ²	28	Pa·s
Curing Time (100°C)	0.75	hr

Cured Properties	Nominal Value	Unit
Lap Shear Strength ³	0.262	MPa
Electric Strength	7.5	kV/mm

Note Message
1 .	Part B
2 .	Part A
3 .	Primed with CF1-135

Resin Grade	Manufacturer	Category	Trademark
RTP 2185 TFE 13 SI 2	RTP Company	PEI	RTP
TRIREX® 3022U(E)	Samyang Corporation	PC	TRIREX®
Witcom PA6 2012/079	Witcom Engineering Plastics B.V.	Nylon 6	Witcom PA6
NEFTEKHIM ABS 0445E	Nizhnekamskneftekhim Inc.	ABS	NEFTEKHIM ABS
Isocor™ HG26SI	Shakespeare Monofilaments and Specialty Polymers	Nylon 612	Isocor™