Order Products : sales@su-jiao.com
POLYFLON™ F-207
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | POLYFLON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1LZYgM_POLYFLON-F-207.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Daikin PTFE (polytetrafluoroethylene) fine powders are soft, white polymers that are produced from PTFE aqueous dispersions. These fine powders possess the lowest coefficient of friction, the highest heat resistance, chemical resistance, electrical properties, and non-sticking properties of all fluoropolymers. Daikin PTFE fine powders readily adsorb organic solvents resulting in the formation of a paste that can be easily extruded into thin, flexible sections. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.45 | g/cm³ | ASTM D4895 |
| Average Particle Size | 500 | µm | ASTM D4895 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Reduction Ratio 1 | > 4000 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | > 19.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 350 | % | JIS K6891 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 322 to 328 | °C | ASTM D4895 |
| Electrical | Nominal Value | ||
|---|---|---|---|
| Dielectric Constant | 2.08 | ||
| Dissipation Factor | 1.7E-4 |
| Note Message | |
|---|---|
| 1 . | The reduction ratio refers to the cross-sectional area of the resin nside the cylinder of the extruder (S1) and the cross-sectional area of the resin in the die land (S2), R. R. =S1/S2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom SC14-1213 | Spartech Polycom | Nylon 66 | Spartech |
| VESTAMID® NRG 2901 black | Evonik Industries AG | Nylon 12 | VESTAMID® NRG |
| ALTECH® NXT PP-H A 2430/450 GF20 MR10 CP | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® NXT PP-H |
| APEX® 3610-90 | Teknor Apex Company | PVC, Flexible | APEX® |
| DENITER 7063 | Vamp Tech | PBT | DENITER |
