Order Products : sales@su-jiao.com
CERTENE™ SGS-015
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1L56GH_CERTENE-SGS-015.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SGS-015 is a certified prime grade High Molecular Weight specially developed for EXTRUSION-THERMOFORMING of foamed sheet used in critical taste and odor sensitive applications. SGS-015 offers high melt viscosity, easy processability, very low residual volatiles, excellent clarity, good cell structure formation, and high heat resistance to provide excellent performance in hot food packaging. SGS-015 typical applications include foamed sheet for use in egg cartons, meat and produce trays, fast food and dinnerware packaging, extrusion of solid sheet, and biaxially oriented (OPS) polystyrene sheet for cookie and cake trays. SGS-015 complies with FDA regulation 21CFR 177.1640 and with most international regulations concerning the use of Polystyrene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 1.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(M-Scale) | 78 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2960 | MPa | ASTM D638 |
| Tensile Strength 2(Yield, Injection Molded) | 52.4 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 1.5 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 2960 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 100 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 107 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BESN Noir TL | Arkema | Nylon 11 | Rilsan® |
| Rilsan® BUM 30 | Arkema | Nylon 11 | Rilsan® |
| Sanren T300 (1st-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| Softflex® 0954 | Network Polymers, Inc. | TPE | Softflex® |
| Hostacom TRC 364N D8V689 | LyondellBasell Industries | PP Copolymer | Hostacom |
