Order Products : sales@su-jiao.com
Trexprene® A88BW-HF
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | Trexprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1DA5nd_Trexprene-A88BW-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Product Description: TREXPRENE ® A88BW-HF is a heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This high flow, black compound is intended primarily for injection molding applications where longer flow distances and good surface appearance is needed. The material has excellent UV resistance and good elastic properties. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 to 0.980 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 85 to 91 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow 1(100% Strain) | 7.10 | MPa | ISO 37 |
| Tensile Stress - Across Flow 2(Yield) | 14.4 | MPa | ISO 37 |
| Tensile Elongation - Across Flow 3(Break) | 690 | % | ISO 37 |
| Tear Strength - Across Flow 4 | 65 | kN/m | ISO 34-1 |
| Compression Set | |||
| 70°C, 22 hr | 50 | % | ASTM D395B |
| 125°C, 70 hr | 70 | % | ASTM D395B |
| 70°C, 22 hr 5 | 50 | % | ISO 815 |
| 125°C, 70 hr 6 | 70 | % | ISO 815 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | |||
| -- | -50.0 | °C | ASTM D746 |
| Type B | -50.0 | °C | ISO 812 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | 15 | mm/min | ISO 3795 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Accelerated Weathering Duration 7 | Delta E < 3 | SAE J2527 | |
| Ozone Resistance (40°C) 8 | 0 Rating | ISO 1431-1 | |
| Weatherability 9 | SAE J1976 | ||
| Arizona | Delta E < 3 | ||
| Florida | Delta E < 3 |
| Note Message | |
|---|---|
| 1 . | Type 1, 500 mm/min |
| 2 . | Type 1, 500 mm/min |
| 3 . | Type 1, 500 mm/min |
| 4 . | Method Ba, Angle (Unnicked), 500 mm/min |
| 5 . | Type A |
| 6 . | Type A |
| 7 . | Extended UV Filters, 2500 kJ/m 2 |
| 8 . | 100 pphm, Method A |
| 9 . | 2 years exposure, Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TF7CGT (Series: FC) | KRAIBURG TPE | TPE | THERMOLAST® K |
| INSPIRE™ TF1502 ESU | Trinseo | PP, Unspecified | INSPIRE™ |
| Iupital® FV-30 | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
| Lushan EV1050G2 | Guangzhou Lushan New Materials Co., Ltd | EVA | Lushan |
| SQUARE® LIM3600-60A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
